Top 10 Best yaqin amplifier

Top 10 Best yaqin amplifier in 2021 Comparison Table

Bestseller No. 1
Yaqin MC-84L Stereo Vacuum Tube Push-Pull Integrated Amplifier ,Output Power12Wx2,Tubes 6P14x4pcs 12AX7Bx2pcs
  • A Serious Tube Amplifier: Even though the price of Yaqin MC-84L is low, but this amplifier virtually is an audiophile grade ultra linear push-pull, full Class A tube amplifier!!!!
  • Premium Grade Construction at a Fair Price:a majority of the components are of audiophile grade, produced by some of the best companies in the industry such as Solen, Siemens and Philips. MKP capacitor for reducing AC to DC voltage,famous Shuguang tubes:12AX7B, superior magnet wires on the transformer core,top-quality output transformer, high-quality volume potentiometer.
  • Impressive Sound: this amplifier produces crystal clear sounds so it will make an excellent addition to your sound system;Push-pull Circuitry:this design means low distortion, high efficiency and high output power.
  • Powerful Output: It is only 12 watts per channel, but compared to transistor amplifier, it actually can output more than 60 watts.
  • Output: speaker terminal output and headphone jack (6.3mm jack).
Bestseller No. 2
YAQIN MC-13S Push-Pull Integrated Stereo Tube Amplifier,Output Power 40Wx2, Tubes:2x12AX7, 4xEL34,2x12AU7.
  • Push-Pull in AB Class Mode : working in a 2x40 watts push-pull system in AB class, working in triode mode. Based on 4pcs*EL34 power tubes and 2pcs*12AX7 control lamps (ECC83) and 2pcs*12AU7 control lamps (ECC82),the amplifier reproduces a very even sound, without any coloration.
  • Good Sound Quality with Tube Warmth Feel: the Yaqin MC13S has a very minimal and straightforward circuit, doesn’t have bells and whistles normally found in more expensive integrated amplifier. The bare-bones circuitry of this amplifier delivers a very high-quality sound. The circutry is based on a time tested , ultra-linear push-pull design which made the sound of an EL34 based integrated amplifier the mainstay of frugal tube amp audiophies.
  • High-grade Components:many of the circuit components are of audiophile grade, produced by well-known Japanese,American, and European conpanies, such as Solen/Philips/Siemens/Thomson capacitors, Alps volume controller.High quality STALLOY transformers were used.
  • Well-made Quality: well-made chassis is composed of a brushed anodized aluminium front panel in 10mm thickness, two anodized aluminium side panels in 4mm thickness,and top and bottom covers made of high quality steel, the four line inputs , six banana speaker plugs ,the volume control and the input switch are first rate
  • More affordable Price :Yaqin MC-13S can be considered one of the best class A integrated amplifiers, namely the best integrated amplifier under 1000 dollars. With the lack of extra features normally found in more expensive amps, and primary focus on the sound quality that a tube amp is expected to provide, it can fall under a thousand dollars.
Bestseller No. 3
Reisong A10 EL34 Hi-Fi Audio Stereo Tube Amplifier Single-end Class - A Amp
  • Please pay attention before buying, We received feedback from many buyers, reflecting that Reisong A10 Amp have not enough power. Please confirm that your speaker is a bookshelf speakers with a sensitivity 89db or more. We don't think Reisong A10 work well with a floorstanding Speaker or the low sensitivity speakers.
  • Manual welding, preferred audiophiles, output transformer switch to the 76x40 higher end output transformer.
  • If there is no sound from the machine after waiting for a few minutes, Please make sure the power is connected properly. And try pressing the Black Circle Button on the back of the machine (for switching between AUX and CD modes)
  • Tube EL34 x 2,6N2J x 2,5Z4PJ x 1
  • Reisong Boyuu A10 Amp with tubes protective cover. If you need a circuit diagram, please contact us by email, thank you.
Bestseller No. 4
Moukey Bluetooth 5.0 Power Home Audio Amplifier - 220W Dual Channel Sound Audio Stereo Receiver System w/USB, SD, AUX, MIC in w/Echo, Radio, LED - for Home Theater Speaker via RCA, Studio Use - MAMP1
  • 220 WATTS PEAK POWER: The dual-pass Moukey Bluetooth stereo amplifier receiver is perfect for your karaoke, home theater, acoustic sound system, and monitor headphones. Provide you with enough powerful power amplification, which can accommodate 2 sets of speakers, so that you can enjoy the home audio impact of high-quality audio amplification.
  • BLUETOOTH 5.0 WIRELESS CONNECTION: The sound amplification mixer device is equipped with Bluetooth music streaming with a wireless range of 40 feet / 12 meters or more. The Moukey Bluetooth stereo receiver also equipped with today's latest devices (including smartphones, iPads, iPhones and computers), this stereo amplifer is easy to pair with the receiver.
  • MULTIPLE INPUT AND OUTPUT MODES: The digital amplifier box supports various external signal sources. 2 RCA audio inputs for tuner, CD player, tape drive, two 2.5-inch / 6.35 cm microphone inputs, headphone output port, USB, SD card, 3.5mm AUX IN and FM radio antenna. With RCA audio output, 2 pairs of banana plug speaker output. With the special monitor headphone output design, so you can enjoy audio all the time without the worry that bother others.
  • EASY BALANCE CONTROL: The improved professional compact bookshelf sound amplifier with clear, responsive buttons for mode control. Knobs control microphone echo / volume, balance, bass, treble, master volume, input source and unique folder / track.
  • HD SCREEN: The integrated receiver for home stereo has a built in LED display w/ front panel audio control center. FM antenna and remote control are included in the stereo amplifier package for distant audio adjustments.
SaleBestseller No. 5
AIYIMA A07 TPA3255 Power Amplifier 300Wx2 HiFi Class D Stereo Digital Audio Amp 2.0 Channel Amplifier for Passive Speaker Home Audio (A07+DC 32V Power Adapter)
  • ❶ This AIYIMA A07 power amplifier adopt the TPA3255D2 amp chip and NE5532 op-amp chip.Very Quiet, Runs Extremely Cool,Easy to set up.It's a nice mini audio component amplifiers for Home Audio stereo system
  • ❷ 300W+300W HiFi integrated class D amplifier, Exclusively designed for the customers who pursue HiFi sound,High efficient max power output up to 300 Watt
  • ❸ Two input ways:3.5mm AUX Audio input/ RCA Audio input(3.5mm interface is also Aux Audio output interface.More detail connection and use ways,pls see the main picture shown)
  • ❹ Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre system and so on;A computer, an tube preamp(TUBE A3 PRO / T7 / T8), matched with our A07 home speaker amplifier, connected to your home audio passive speakers to form a perfect HIFI system, allowing you to liberate your ears in this noisy city
  • ❺ Package with a DC 32V 5A Power Adapter for free,But if you want to get the maximum power of 300W, you need to buy a power adapter that uses DC 48V and current is above 7A(Cannot use industrial power supply,and please choose the correct passive speaker power to use ).Any doublt and help, please contact the seller for support: www.amazon.com/hz/help/contact/A3BG62S1F23IH5#
Bestseller No. 6
Nobsound 6P1 6.8W x 2 Vacuum Tube Power Amplifier; Stereo Class A Single-Ended Audio Amp Handcrafted
  • This Class A single-ended vacuum tube amplifier adopts hand welding to ensure the true reality of the sound quality (with headphone amp function ASIN: B076CC92BX).
  • This amplifier adopts transformer parallel output to reduce its internal resistance by half and achieve doubled improvement on its power.
  • Using antimagnetic transformer covers to shield current interference and achieve much lower static noise.
  • Its sound output is full of analog style. The bass part is deep and powerful and the vocal part is sweet and intoxicating.
  • It has a classic and graceful appearance. The VU meters and vacuum tubes makes it more elegant and attractive.
Bestseller No. 7
S.M.S.L M400 Supports MQA decoding Second XMOS XU216 AK4499 Chip Bluetooth 5.0 DSD512 32Bit/768kHz Fully balaced Output High-Resolution Hi-end Audio DAC
  • Flagship DAC chip AK4499, the audio industry's highest performance.
  • The latest Bluetooth supports APTX/HD, SBC, AAC and the industry's highest specification 24bit/192kHz UAT format!
  • Support MQA full decode ! No matter where you are, it ’s like being on the scene.
  • USB uses the second XMOS XU216,support native DSD and 32bit 768kHz!
  • Support LVDS level differential I2 S reception (using HDMI interface), it can accept the lowest jitter digital audio!
SaleBestseller No. 8
Fosi Audio BT20A Bluetooth 5.0 Stereo Audio 2 Channel Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0 CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116 (with Power Supply)
  • Small simple compact design but practical and powerful, little Hi-Fi Bluetooth wireless amplifier exclusively designed for the customers who pursue HiFi sound;
  • Bluetooth 5.0 core, up to 50ft connection range guarantees low signal delay. No pop, no audible noise when Bluetooth connection is established;
  • 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers, (For passive speakers only, not the powered speakers.)
  • Advanced circuitry design, built-in speakers protection circuit, best for bookshelf/computer/desktop/speakers in your home;
  • Home integrated digital amplifier, 18-month warranty, you can return the item if you have any problems;
Bestseller No. 9
Nobsound 6P1 6.8W x 2 Vacuum Tube Power Amplifier; Stereo Class A Single-Ended Audio Amp Headphone Amplifier Handcrafted (with Headphone Amp Function)
  • This Class A single-ended vacuum tube amplifier adopts hand welding to ensure the true reality of the sound quality. This version has headphone output, which suits for 32Ω-600Ω impedance all kinds of headphones. The toggle on the front panel is to switch between speaker and headphones. Please connect your speakers (both 4Ω and 8Ω) to 8Ω and 0Ω posts.
  • This amplifier adopts transformer parallel output to reduce its internal resistance by half and achieve doubled improvement on its power.
  • Using antimagnetic transformer covers to shield current interference and achieve much lower static noise.
  • Its sound output is full of analog style. The bass part is deep and powerful and the vocal part is sweet and intoxicating.Its sound output is full of analog style. The bass part is deep and powerful and the vocal part is sweet and intoxicating.
  • It has a classic and graceful appearance. The VU meters and vacuum tubes makes it more elegant and attractive.
Bestseller No. 10
Dared MP-5BT HiFi Vacuum Tube Amplifier, Audiophiles Professional Stereo Integrated AMP, Hybrid Amplifier, Bluetooth/USB DAC/Line Input, 25W x 2 Output, with 6N11,6N21,6E21 Tubes
  • Dared MP-5BT is a most popular tube amplifier, sales over 100 thousand units, top player in hi-fi vacuum tube amplifier industry, It is a favorite of music buffs for the past 20 years, with a number of patented technologies, with amazing sound and amazing appearance, it is a work of art!
  • This vacuum tube amplifier adopts hand welding and with highest quality components and materials to ensure the true reality of the sound quality, The amplifier hybrid preamp section and class AB power amp section. The tubes deliver warm and subtle music to the preamp section, while the solid state components increases the efficiency and quality of the music.
  • 25 watts per channel output, power can drive most home stereo speakers, Support bluetooth wireless for android, iPhone, tablets, smartphones, other streaming devices (supports APTX), support direct line-in, friendly USB and Aux input, when you plug it in via DAC/USB. Speaker output, pre output and 3.5mm headphone personal listening output.
  • Vacuum tube amplifiers in that the glass vaccum tube section is on the exterior. The chassis is made of finest stainless steel and plated with a high quality rose gold finish, flanked by two 1 inch thick wood panels with a lacquered black piano finish. which looks great in any office, study, or even in the midst of the swankiest cocktail party.
  • This tube amplifier is the best choice for HIFI friends a first choice for music lover, see beautiful and sound beautiful, it's the Dared best-selling and most cost-effective tube amplifier, The machine is warranty for 1 years, If the product you purchase does not satisfy your needs, send it back for a full refund.

Are you Googling for top 10 rated yaqin amplifier for your budget in 2021? Our AI system had scanned more than 97,211 customer satisfaction about top 10 best yaqin amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: YAQIN MS-77T HiFi Vacuum Tube Push Pull Integrated Amplifier, HiFi Valve Tube Pure Amplifier, Hi-Fi Triod and UL 2 Mode Amp, RCA Jack x4 Input, 40 Watt x2 Output, with 7027B x4, 6J1 x8 Tube


Our rating:4.8 out of 5 stars (4.8 / 5)






YAQIN MS-77T Force-pull tube amplifier HIFI vacuum tube amplifier

YAQIN was founded in 1994 and handles an area of far more than 5,000 sq. meters,
has been specialized in the analysis and output of energy amplifiers and transformers for quite a few yrs.
Largely generate Hello-Fi tube amplifiers (tube amplifiers), Hi-Fi tube pure pre-phases, tube DAC decoders, Hello-Fi energy filters, tube radio and other significant-conclusion energy amplifiers.

Technical specs:

  • Output Electrical power: 40Watt x2 (8ohm)
  • Tubes: 7027B x4, 6J1 x8
  • Input sensitivity: ≤0.23V(1KHz)
  • Frequency: 5Hz~68KHz (-2dB)
  • Sign/Noise Ratio: ≥88dB (A)
  • Harmonic Distortion: ≤0.5% (1KHz)
  • Intake: 250W
  • Audio Enter: 4 groups RCA
  • Audio Output: 2 groups
  • Load impedance: 8ohm or 4ohm
  • Color: Black overall body & Silver
  • Dimension: 17x13x8.3in(Deep x huge x large)
  • Item excess weight: about 50lb
  • Bundle body weight : 52lb
  • Input voltage: 110-120v or 220-240v 50/60hz out there.

Tube Amplifier Precautions

1. Tube amp should related with speakers prior to turning ON. Strictly prohibit send out indicators to amp without the need of related masses(speakers) or load small circuit when the change is ON.

2. Temperature is increased when tube amps doing work, inserting interest to ventilation, cooling.

3. In the boot or just shut down for a period of time (in 30 minutes) Do not spill liquid on the tubes.

4. You should take about 100h time to operate the amp.Operate-IN to the amp offers it’s very best and stable seem.so during the to start with 100h use time the sound it’s possible is not the ideal,you can also use your have operate-in strategy.

✅ YAQIN MS-77T can use like a pure electric power tube amplifier or also an integrated tube amplifier, Person-picked amplifier modes, UT (Ultra linear) method supplies higher output electrical power and TR (Triode) manner does smooth and loaded seem, Gives user adjustable bias, test details to refine bias of the output tubes.
✅ Attractive large duty chassis (stainless steel top rated, steel bottom) and aluminum panel and bezels, gold plated connectors, gold plated tube sockets, Channel/volume handle with distant command, 40 watt left and proper channel with fuse output. Improved audio and high output electricity.
✅ 7027B x4 vacuum tube thrust-pull electricity output with tube bias voltage adjustment, 6J1 x8 vacuum tube for voltage amplification, current generate. 4/8 ohm with fuse output, with headphone output, The bass aspect is deep and strong and the vocal element is sweet and intoxicating.
✅ The most effective channel isolation is delivered by more than-sized transformers, made of .35 thick silicon steel sheet and significant-high-quality enameled wire, transformer potting processing, with antimagnetic transformer covers to protect existing interference and achieve considerably reduce noise.
✅ All the elements are of substantial high-quality stage in hifi field, Audio unique-grade electrolytic capacitor, precision resistors for audio frequency, quantity controller, gold plated speaker output. Very low distortion, produce balanced and colourful tone, a excellent selection to enjoy vocal, symphony and common audio.

Leave a Comment