Top 10 Best topping headphone amplifier

Top 10 Best topping headphone amplifier in 2021 Comparison Table

Bestseller No. 1
Topping A30 Pro NFCA Headphone Amplifier OPA1656 4PIN XLR 4.4MM 6.35MM Output Balanced Input Amplifier (Black)
  • The THD+N of A30Pro is no higher than 0.00006%,which means the A30Pro accurately restores 99.99994% of the original sound.
  • A30Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended per formance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance.
  • Incredible output power: The new specifically redesigned NFCA based circuit is optimized for terrific single ended performance
  • A30Pro provides 3 step gain settings, which can easily adapt to the huge sensitivity span from IEMs to high im pedance and full size over-ears. Just connect the earphones and leave the rest to the A30Pro.
  • The A30Pro already provides you all in a compact body, including 4-PIN-XLR,4 .4mm, 6.35mm.
Bestseller No. 2
Topping A30 Pro NFCA Headphone Amplifier SE Balanced XLR Earphone Amps XLR 4.4mm 6.35mm Output 6000mW x 6000mW Balanced Headphone Amp for D30 Pro (Black)
  • ▶ APX555B Limited Our Measurement Again: The THD + N of A30 Pro is no higher than 0.00006%, which means the A30 Pro accurately restores 99.99994% of the original sound, what you get is what you input.
  • ▶ Pushing The Envelope: A30 Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended performance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance.
  • ▶ 4-PIN-XLR + 4.4mm +6.35mm Output: Since then, buying headphones does not have to consider whether the plug matches the headphone amplifier, because the A30 Pro already provides you all in a compact body, including 4-PIN-XLR, 4.4mm, 6.35mm.
  • ▶ ≥250Ω = Cass A: A30 Pro is designed with ample quiescent current. When the headphone impedance is greater than 250 ohms, itwill fully work in Class A operation.
  • ▶ SE + BAL Input Pass Through: When shutting down, the input signal is directly output to RCA or TRS without amplification, which will be more suitable for active speakers / monitor speakers when the DAC has pre-amplifier functions. Even better when used with D30 Pro, the excellent noise performance of D30 Pro is not wasted.
Bestseller No. 3
Topping L30 Linear Headphone Amplifier NFCA 3500mWx3500mW HiFi Stereo Home Audio Amplifier Desktop Preamplifier (Black,New Version)
  • ♫ The Latest Version: Its serial number is 2012 version or higher. TOPPING L30 HEADPHONE AMPLIFIER Support 6.35 / 3.5mm headphone output. 3500mW x 3500mW. NFCA modules. Suitable for all kinds of earphones.
  • ♫ ULTRA-HIGH PERFORMANCE NFCA MODULES: High output current drive capability allows the amp driving low impedance headphones with ease. 0.3uV ultra-low noise , 141dB dynamic range. Darkest background.
  • ♫ WIDE RANGE OF ADAPTATION TO HEADPHONE: It easily drives power-hungry headphones with a wide range of different impedanc. L30 has a high voltage swing of 26vp-p, power of 3500mW perchannel when both channels are driven and output impedance of less than 0.1Ohm.
  • ♫ 3 STEP GAIN SETTINGS: Adapt to various sensitivities. L30 is equipped with three gain settings of-99db/0d B/9.5db. Wide range of gain settings and the 0. 3uVrms ultra-low noise makes L30 easily adapt to all types of headphones from extremely sensitive EMS to most power demanding full-sized over-ears.
  • ♫ EXCELLENT PREAMP: The NFCA modules of L30 are not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance. When it is in preamp mode, output impedance is as low as 20ohm, which is widely suitable for various devices.
Bestseller No. 4
Topping DX7 Pro ES9038Pro DAC Bluetooth 5.0 32Bit/768kHz DSD1024 LDAC Hi-Res Decoder Headphone Amplifier (Black)
  • DX7 pro uses ESS DAC ES9038PRO chip,with TOPPING elaborate design and adjustment,the distortion is <0. 00010%,DNR <126dB,and SNR <126dB,accurately restores each wonderful note to your ears.
  • Bluetooth 5.0,redefining HD wireless audio with LDAC
  • DX7Pro uses CSR8675 chipset to support Bluetooth 5.0 and LDAC/AAC/SBC/APTX/APX LL/APX HD protocol.
  • DX7 Pro could achieve 24bit 96KHZ HD transmission With LDAC, the Bluetooth could have good sound performance from right on.
  • XMOS XU208 and Thesycon customized driver(Win 7 and above)gives the DX7 Pro superior decoding capability on USB;PCM support up to 32bit 768KHZ and DSD support to DSD512(native).
Bestseller No. 5
Topping A90 HiFi Headphone Amplifier Pre Amplifier Balanced Output NFCA Modules 4-PIN-XLR 4.4 Balanced 6.35mm SE Output 7600mW x 2 Amplifiers for D90se (Black)
  • ♫ Headphone-amp & Pre-amp: The NFCA modules of A90 are not only able to drive the headphone but also apply to be the pre-amp. When it is in pre-amp mode, the 20ohm SE and 40 ohm balanced output impedance are widely suitable for various-power amplifiers Ultra.
  • ♫ Full balanced SE Headphone Output: A90 has three output headphone jacks of 4-PIN-XLR, 4.4 balanced and 6.35 SE to meet different usages.
  • ♫ 3 Step gain setting & adapt to various sensitivities: A90 is equipped with three gain settings of -95dB/0dB/9.5dB for SE and-35dB /6.0dB/15.5dB for balanced. The SE 25Vpp / balanced 49Vpp high output voltage.
  • ♫ High output current drive capability A the amp driving low impedance headphones with ease: Ultra low noise of 0.2uV is miles ahead of the competition giving absurdly high dynamic range of 145dB and no audible noise and darkest background for the most sensitive IEMS.
  • ♫ Ultra-high Performance NFCA modules: A90 implemented the first member of the new NFCA(Nested Feedback Composite Amplifier) module series Voltage Current hybrid feedback architecture along with UHGF(ultra high gain feedback) technology rovide excellent DC and AC performance. Note: Any question, please contact us, we will help you solve it, please don't return it directly.
Bestseller No. 7
Topping A90 6.35mm Headphone Amplifier 7600mW x 7600mW for D90 Premplifier XLR SE Output Desktop HiFi Full Balanced Amplifier (Silver)
  • ► Headphone-amp & Pre-amp: The NFCA modules of A90 are not only able to drive the headphone but also apply to be the pre-amp.
  • ► Full balanced SE Headphone Output: A90 has three output headphone jacks of 4-PIN-XLR, 4.4 balanced and 6.35 SE to meet different usages.
  • ► 3 Step gain setting & Adapt to various sensitivities: A90 is equipped with three gain settings of -95dB/0dB/9.5dB for SE and-35dB /6.0dB/15.5dB for balanced.
  • ► High output current drive capability: Ultra low noise of 0.2uV is miles ahead of the competition giving absurdly high dynamic range of 145dB and no audible noise and darkest background for the most sensitive IEMS.
  • ► It's a great companion of active monitors stacked with D90 DAC when A90 work as pre-amp application. Note: Any question, please contact us, we will help you solve it, please don't return it directly.
Bestseller No. 8
Linsoul Topping L30 Mini Portable HiFi Headphone Amplifier with NFCA Setup for Musician Audiophile (Black)
  • ▶Note:All L30 are updated to newest batch. Please do not worry! ◀ Ultra-High Performance NFCA Modules. L30 adopts the same NFCA module from flagship A90. Ultra-low noise of 0.3uV gives an absurdly high dynamic range of 141dB and no audible noise.
  • Wide Applications for Headphones. L30 has a high voltage swing of 26Vp-p, power of 3500mW per channel when both channels are driven and output impedance of less than 0.1ohm. It easily drives power for headphones with a wide range of different impedance.
  • 3 Steps Gain Settings. L30 is equipped with three gain settings of -9.9dB/0dB/9.5dB.Wide range of gain settings and the 0.3uVrms ultra-low noise makes L30 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full-sized over-ears
  • High Quality Amplifier. The NFCA modules of L30 are not only able to drive the headphones but also apply to be a pre-amplifier with the same ultra-high performance. When it is in preamp mode, the output impedance is as low as 20 ohm, which is widely suitable for various devices. It is a great companion of active monitors stacked with E30 DAC when L30 working in preamp mode
  • Perfect Companion for Audiophile. Designed with a portable and compact body, L30 could be your HiFi device on-the-go for every day life. Simply take it anytime anywhere, you will enjoy pure high fidelity music
Bestseller No. 9
Topping DX7 Pro ES9038Pro DAC Bluetooth 5.0 LDAC 32Bit/768kHz DSD1024 Full Balanced Headphone Amplifier Hi-Res Digital Stereo Audio Decoder (Black)
  • ♪ DX7 Pro also support USB/BT/OPT/COAX / AES IIS input. Support RCA /XLR / RCA+XLR Output. It is able to compatible with both XLR balanced and RCA single-end.
  • ♪ Bluetooth 5.0 LDAC Decoder: DX7 Pro uses CSR8675 chipset to support bluetooth 5.0 and LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. DX7 Pro could achieve 24 bit/96 khz HD transmission with LDAC.
  • ♪ Desktop Audio DAC: DX7 pro uses ESS DAC ES9038PRO chip, with TOPPING elaborate design and adjustment, the distortion is <0.00010 %, DNR <126dB, and SNR <126dB, accurately restores each wonderful note to your ears.
  • ♪ Topping DX7 pro Support DSD1024,PCM32bit / 768 kHz Maximum. XMOS XU208 and Thesycon customized driver(Win 7 andabove )gives the DX7 Pro superior decoding capability on USB: PCM support up to 32bit 768KHZ and DSD support to DSD512(native).
  • ♪ Bluetooth Headphone Amplifier & DAC application: Connect the bluetooth of your phone tablet and notebook to DX7 pro and connect your amplifier, active speakers or headphones to the DX7 pro's output, then DX7 pro becomes your bluetooth headphone amp/bluetooth dac.
Bestseller No. 10
Topping Headphone Amplifier Decoder Topping NX4 DSD XMOS-XU208 DAC ES9038Q2M Chip Portable Headphone Amplifier Decoder (Black)
  • DSD: PCM768,DSD512
  • Headphone output: 293Mw
  • Suitable headphone impedance: 16-300ω
  • Connectivity Technology: Wired

Are you finding for top 10 great topping headphone amplifier for your budget in 2021? Our AI system had scanned more than 81,477 customer satisfaction about top 10 best topping headphone amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Topping A30 Pro NFCA Headphone Amplifier OPA1656 4PIN XLR 4.4MM 6.35MM Output Balanced Input Amplifier (Black)


Our rating:4.7 out of 5 stars (4.7 / 5)





Product Description

Topping A30 Pro NFCA Headphone Amplifier  4PIN XLR 4.4MM 6.35MM Output Balanced Input AmplifierTopping A30 Pro NFCA Headphone Amplifier  4PIN XLR 4.4MM 6.35MM Output Balanced Input Amplifier

xlr 4.4mm 6.35mm amplifierxlr 4.4mm 6.35mm amplifier

balanced input amplifierbalanced input amplifier

Adapt to various sensitivities

A30Pro provides 3 step gain settings, which can easily adapt to the huge sensitivity span from IEMs to high impedance and full size over-ears.Just connect the earphones and leave the rest to the A30Pro.

+14dB

0dB

-14dB

4-PIN-XLR 4.4mm 6.35mm Hi-Res Audio headphones amplifier

A30Pro is designed with ample quies- cent current. When the headphone im- pedance is greater than 250 ohms, it will fully work in Class A operation.

Since then, buying headphones does

not have to consider whether the plug

matches the headphone amplifier,

because the A30Pro already provides

you all in a compact body, including

4-PIN-XLR,4.4mm,6.35mm.

Bypass output when power off

Balanced input

Maximum output power: 6Wx2@16ohm 840mWx2@300ohm

NFCA AMPLIFIERNFCA AMPLIFIER

Say good bye to the ground loops noise

When multiple equipment are used, RCA connection may encounter ground loop noise.

A30Pro introduces a GND/LIFT switch as the solution. When in normal use, set it to GND;

when encountering ground loop noise, switch to LIFT to change the ground point of the A30Pro from the it’s chassis to other equipment which it connected to. Ground loop noise disappeared.

A30 pro Headphone Amplifier specifications

topping a30pro headphone amplifiertopping a30pro headphone amplifier

TOPPPING A30PRO AMPLIFIER BLACKTOPPPING A30PRO AMPLIFIER BLACK

A30Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended per formance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance.
Incredible output power: The new specifically redesigned NFCA based circuit is optimized for terrific single ended performance
A30Pro provides 3 step gain settings, which can easily adapt to the huge sensitivity span from IEMs to high im pedance and full size over-ears. Just connect the earphones and leave the rest to the A30Pro.
The A30Pro already provides you all in a compact body, including 4-PIN-XLR,4 .4mm, 6.35mm.

Leave a Comment