Top 10 Best topping headphone amp

Top 10 Best topping headphone amp in 2021 Comparison Table

SaleBestseller No. 1
[New Version] Topping L30 Mini HiFi Amp Audio Hi-Res Headphone Amplifier NFCA Preamplifier (Black)
  • NFCA Modules - It provides excellent DC and AC performance.High output current drive capability allows the amp driving low impedance headphones with ease.Ultra-low noise of 0.3uV is miles ahead of the competition,giving an absurdly high dynamic range of 141dB and no audible noise and darkest background for the most sensitive IEMs.Use it as a great music DAC/amp,it will surprise you
  • High-fidelity Headphone Amplifier - Support 6.35 / 3.5mm headphone output.It easily drives power-hungry headphones with a wide range of different impedance.And L30 is equipped with three gain settings of -9.9dB/0dB/9.5dB.Wide range of gain settings and the 0.3uVrms ultra-low noise makes L30 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full-sized over-ears
  • Application - Not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance.It is a great companion of active monitors stacked with E30 DAC when L30 working in preamp mode
  • Perfect for Music and Gaming - When you use it for music,you can experience crystal clear audio the way you would hear it in the recording studio.L30 also is really good for FPS gaming.Can use it with dolby atmos and the directional sounds perfectly
  • Warranty - All devices come with a 12 month warranty by Topping.If you have any other questions about the products ,please feel free to contact the seller
Bestseller No. 2
Topping A90 HiFi Headphone Amplifier Pre Amplifier Balanced Output NFCA Modules 4-PIN-XLR 4.4 Balanced 6.35mm SE Output 7600mW x 2 Amplifiers for D90se (Black)
  • ♫ Headphone-amp & Pre-amp: The NFCA modules of A90 are not only able to drive the headphone but also apply to be the pre-amp. When it is in pre-amp mode, the 20ohm SE and 40 ohm balanced output impedance are widely suitable for various-power amplifiers Ultra.
  • ♫ Full balanced SE Headphone Output: A90 has three output headphone jacks of 4-PIN-XLR, 4.4 balanced and 6.35 SE to meet different usages.
  • ♫ 3 Step gain setting & adapt to various sensitivities: A90 is equipped with three gain settings of -95dB/0dB/9.5dB for SE and-35dB /6.0dB/15.5dB for balanced. The SE 25Vpp / balanced 49Vpp high output voltage.
  • ♫ High output current drive capability A the amp driving low impedance headphones with ease: Ultra low noise of 0.2uV is miles ahead of the competition giving absurdly high dynamic range of 145dB and no audible noise and darkest background for the most sensitive IEMS.
  • ♫ Ultra-high Performance NFCA modules: A90 implemented the first member of the new NFCA(Nested Feedback Composite Amplifier) module series Voltage Current hybrid feedback architecture along with UHGF(ultra high gain feedback) technology rovide excellent DC and AC performance. Note: Any question, please contact us, we will help you solve it, please don't return it directly.
Bestseller No. 3
Topping EX5 MQA Dual ES9038Q2M DAC Bluetooth 5.0 LDAC DSD512 PCM 768kHz Hi-Res Audio HiFi Decoder Headphone Amplifier (Black)
  • Dual ESS ES9038Q2M SABRE HIFI DAC Chips, MQA Full Decoding via USB
  • Support DSD512 Native and PCM 768kHz, MQA Full Decoding via USB
  • 2nd Generation 16 Core XMOS XU216, 4-PIN-XLR and 6.35mm Headphone Output
  • THD+N as low as 0.00010%, 1300mW X2 Output Power
  • DAC + Pre amp applicaion/ Bluetooth receiver/Tablet and phone DAC application
Bestseller No. 4
Topping A90 Headphone Amplifier 4.4mm XLR Desktop HiFi Full Balanced Amplifier Pre-Amplifier Black
  • Full balanced + SE headphone output---A90 has three output headphone jacks of 4-pin-XLR,4.4 balanced and 6.35 SE to meet different usages.
  • A90 is provided with a wide range of adaptation to headphones.---The SE 25Vpp / balanced 49Vpp high output voltage along with high output current & less than 0.1 Ohm output impedance,
  • A90 is equipped with three gain settings of -9.5dB/ 0dB / 9.5dB for SE and -35dB / 6.0dB / 15.5dB for balanced. The noise of merely 0. 2uVrms makes A90 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full sized over-ears.
  • It's a great companion of active monitors stacked with D90 DAC when A90 work as pre-amp application.
  • DAC + Pre-amp appplication
Bestseller No. 5
Topping A30 Pro NFCA Headphone Amplifier OPA1656 4PIN XLR 4.4MM 6.35MM Output Balanced Input Amplifier (Silver)
  • The THD+N of A30Pro is no higher than 0.00006%,which means the A30Pro accurately restores 99.99994% of the original sound.
  • A30Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended per formance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance.
  • Incredible output power: The new specifically redesigned NFCA based circuit is optimized for terrific single ended performance
  • A30Pro provides 3 step gain settings, which can easily adapt to the huge sensitivity span from IEMs to high im pedance and full size over-ears. Just connect the earphones and leave the rest to the A30Pro.
  • The A30Pro already provides you all in a compact body, including 4-PIN-XLR,4 .4mm, 6.35mm.
Bestseller No. 6
Topping A30 Pro NFCA Headphone Amplifier SE Balanced XLR Earphone Amps XLR 4.4mm 6.35mm Output 6000mW x 6000mW Balanced Headphone Amp for D30 Pro (Black)
  • ▶ APX555B Limited Our Measurement Again: The THD + N of A30 Pro is no higher than 0.00006%, which means the A30 Pro accurately restores 99.99994% of the original sound, what you get is what you input.
  • ▶ Pushing The Envelope: A30 Pro uses the new specifically redesigned NFCA based circuit is optimized for terrific single ended performance. Massive paralleled high performance audio opamp architecture along with UHGF technology provides excellent DC and AC performance.
  • ▶ 4-PIN-XLR + 4.4mm +6.35mm Output: Since then, buying headphones does not have to consider whether the plug matches the headphone amplifier, because the A30 Pro already provides you all in a compact body, including 4-PIN-XLR, 4.4mm, 6.35mm.
  • ▶ ≥250Ω = Cass A: A30 Pro is designed with ample quiescent current. When the headphone impedance is greater than 250 ohms, itwill fully work in Class A operation.
  • ▶ SE + BAL Input Pass Through: When shutting down, the input signal is directly output to RCA or TRS without amplification, which will be more suitable for active speakers / monitor speakers when the DAC has pre-amplifier functions. Even better when used with D30 Pro, the excellent noise performance of D30 Pro is not wasted.
Bestseller No. 7
Topping DX7 Pro ES9038Pro DAC Bluetooth 5.0 32Bit/768kHz DSD1024 LDAC Hi-Res Decoder Headphone Amplifier (Black)
  • DX7 pro uses ESS DAC ES9038PRO chip,with TOPPING elaborate design and adjustment,the distortion is <0. 00010%,DNR <126dB,and SNR <126dB,accurately restores each wonderful note to your ears.
  • Bluetooth 5.0,redefining HD wireless audio with LDAC
  • DX7Pro uses CSR8675 chipset to support Bluetooth 5.0 and LDAC/AAC/SBC/APTX/APX LL/APX HD protocol.
  • DX7 Pro could achieve 24bit 96KHZ HD transmission With LDAC, the Bluetooth could have good sound performance from right on.
  • XMOS XU208 and Thesycon customized driver(Win 7 and above)gives the DX7 Pro superior decoding capability on USB;PCM support up to 32bit 768KHZ and DSD support to DSD512(native).
Bestseller No. 9
Topping L30 Linear Headphone Amplifier NFCA 3500mWx3500mW HiFi Stereo Home Audio Amplifier Amps Desktop Preamplifier (Silver, New Version)
  • ♫ The Latest Version: Its serial number is 2012 version or higher. TOPPING L30 HEADPHONE AMPLIFIER Support 6.35 / 3.5mm headphone output. 3500mW x 3500mW. NFCA modules. Suitable for all kinds of earphones.
  • ♫ ULTRA-HIGH PERFORMANCE NFCA MODULES: High output current drive capability allows the amp driving low impedance headphones with ease. 0.3uV ultra-low noise , 141dB dynamic range. Darkest background.
  • ♫ WIDE RANGE OF ADAPTATION TO HEADPHONE: It easily drives power-hungry headphones with a wide range of different impedanc. L30 has a high voltage swing of 26vp-p, power of 3500mW perchannel when both channels are driven and output impedance of less than 0.1Ohm.
  • ♫ 3 STEP GAIN SETTINGS: Adapt to various sensitivities. L30 is equipped with three gain settings of-99db/0d B/9.5db. Wide range of gain settings and the 0. 3uVrms ultra-low noise makes L30 easily adapt to all types of headphones from extremely sensitive EMS to most power demanding full-sized over-ears.
  • ♫ EXCELLENT PREAMP: The NFCA modules of L30 are not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance. When it is in preamp mode, output impedance is as low as 20ohm, which is widely suitable for various devices.
Bestseller No. 10
【New Version】 Linsoul Topping L30 Mini Portable HiFi Headphone Amplifier with NFCA Setup for Musician Audiophile (Black)
  • ▶Note: The serial number is 2012 version or higher. Please do not worry! ◀ Ultra-High Performance NFCA Modules. L30 adopts the same NFCA module from flagship A90. Ultra-low noise of 0.3uV gives an absurdly high dynamic range of 141dB and no audible noise.
  • Wide Applications for Headphones. L30 has a high voltage swing of 26Vp-p, power of 3500mW per channel when both channels are driven and output impedance of less than 0.1ohm. It easily drives power for headphones with a wide range of different impedance.
  • 3 Steps Gain Settings. L30 is equipped with three gain settings of -9.9dB/0dB/9.5dB.Wide range of gain settings and the 0.3uVrms ultra-low noise makes L30 easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full-sized over-ears
  • High Quality Amplifier. The NFCA modules of L30 are not only able to drive the headphones but also apply to be a pre-amplifier with the same ultra-high performance. When it is in preamp mode, the output impedance is as low as 20 ohm, which is widely suitable for various devices. It is a great companion of active monitors stacked with E30 DAC when L30 working in preamp mode
  • Perfect Companion for Audiophile. Designed with a portable and compact body, L30 could be your HiFi device on-the-go for every day life. Simply take it anytime anywhere, you will enjoy pure high fidelity music

Are you Googling for top 10 rated topping headphone amp for your budget in 2021? We had scanned more than 43,171 customer satisfaction about top 10 best topping headphone amp in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Topping A90 HiFi Headphone Amplifier Pre Amplifier Balanced Output NFCA Modules 4-PIN-XLR 4.4 Balanced 6.35mm SE Output 7600mW x 2 Amplifiers for D90se (Black)


Our rating:4.7 out of 5 stars (4.7 / 5)







Topping A90 HIFI Headphone Amplifier Pre amplifier Balanced Output NFCA Modules 4-PIN-XLR 4.4 Well balanced 6.35mm SE Output 7600mW x 2 Amplifiers

Headphone-amp & Pre-amp: The NFCA modules of A90 are not only ready to travel the headphone but also implement to be the pre-amp. When it is in pre-amp mode, the 20ohm SE and 40 ohm balanced output impedance are extensively suited for numerous-electric power amplifiers Ultra.

Complete well balanced SE Headphone Output: A90 has 3 output headphone jacks of 4-PIN-XLR, 4.4 balancedand 6.35 SE to meet up with distinctive usages.

3 Step attain placing & adapt to several sensitivities: A90 is outfitted with 3 gain settings of -95dB/0dB/9.5dB for SE and-35dB /6.0dB/15.5dB for well balanced. The SE 25Vpp / balanced 49Vpp significant output voltage.

Substantial output present-day push capability A the amp driving minimal impedance headphones with relieve: Extremely very low sound of .2uV is miles forward of the competitiveness providing absurdly high dynamic array of 145dB and no audible sounds and darkest qualifications for the most delicate IEMS.

Ultra-higher Functionality NFCA modules: A90 carried out the to start with member of the new NFCA(Nested Feed-back Composite Amplifier) module series Voltage Present-day hybrid comments architecture along with UHGF(extremely large obtain feedback) engineering rovide outstanding DC and AC performance.

Deal Listing :
1 x TOPPING A90
1 x AC Cable
1 x 6.35mm to 3.5mm connector
1 x Person Manual
1 x Warranty Card

Notice: Any issue, remember to get in touch with us, we will assistance you fix it, make sure you will not return it right.
♫ Headphone-amp & Pre-amp: The NFCA modules of A90 are not only capable to generate the headphone but also utilize to be the pre-amp. When it is in pre-amp manner, the 20ohm SE and 40 ohm well balanced output impedance are greatly suited for several-power amplifiers Ultra.
♫ Entire well balanced SE Headphone Output: A90 has three output headphone jacks of 4-PIN-XLR, 4.4 well balanced and 6.35 SE to fulfill unique usages.
♫ 3 Step acquire location & adapt to numerous sensitivities: A90 is geared up with 3 obtain settings of -95dB/0dB/9.5dB for SE and-35dB /6.0dB/15.5dB for well balanced. The SE 25Vpp / well balanced 49Vpp higher output voltage.
♫ Substantial output recent push functionality A the amp driving very low impedance headphones with ease: Ultra very low sound of .2uV is miles ahead of the competitiveness supplying absurdly superior dynamic assortment of 145dB and no audible noise and darkest qualifications for the most sensitive IEMS.
♫ Extremely-substantial Functionality NFCA modules: A90 carried out the to start with member of the new NFCA(Nested Feed-back Composite Amplifier) module sequence Voltage Present-day hybrid suggestions architecture alongside with UHGF(extremely high obtain feed-back) technological innovation rovide exceptional DC and AC overall performance. Notice: Any query, remember to speak to us, we will assistance you solve it, you should really don’t return it instantly.

Leave a Comment