Top 10 Best rockville amplifier

Top 10 Rated rockville amplifier in 2021 Comparison Table

Bestseller No. 1
Rockville RCS350-6 350 Watt 6 Zone 70V Commercial/Restaurant Amplifier/Bluetooth
  • Rockville RCS350-6 350 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth
  • Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver Capable of 70 volt 100 Volt 8 ohm and 4 ohm 70/100 volt RMS power 184 watts 6-Zones – each zone has a separate volume control Built in Bluetooth Audio streaming Fm radio tuner Usb input to play audio stored on a thumb drive (32GB max)
  • Sd card slot to play music stored on an SD card (32GB max) separate volume control for Mic1 Mic2 Mic3 MP3 line1 line 2 and MP3 Echo control for the mic inputs with speed and repeat adjustments Built in clipping limiter to protect the amp and speakers Bass and treble control Chime button for making announcements Top quality aluminum panel with industrial grade knobs 5 segments signal level indication Built in cooling system keeps component cool at all times
  • (2) sets RCA aux inputs (3) mic inputs Rca line output 100V speaker red positive speaker output terminal 70V speaker red positive speaker output terminal 8 ohm red positive speaker output terminal Shared negative speaker output terminal
  • Power requirements 120V/ 50-60Hz A weighted signal to noise (@ 1W) -68 1Dba A weighted signal to noise (referenced to full 4 ohm power) -89 2Dba Frequency response 49Hz to 14 9 kHz Frequency response VS thd+m (worst case across normal bandwidth 1W @ 8 ohms 0 89% weight 22 7lbs Dimensions 19” x 16” x 4” inches
Bestseller No. 2
Rockville dB15 6000 Watt Peak/1500w RMS Mono 2 Ohm Amplifier Car Audio Amp
  • Rockville dB15 6000 Watt Peak/1500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 1500 Watts x 1 Channel <1% THD+N. - 4 Ohm: 900 Watts x 1 Channel <1% THD+N.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 6000 Watts x 1 Channel. - 4 Ohm: 3600 Watts x 1 Channel.
  • High-Speed MOSFET Power Supply. Optical Coupler Class β€œD” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz.
  • Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.
Bestseller No. 3
Rockville 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp (RPA12)
  • Rockville RPA12 5000 Watt peak/ 1400W RMS 2 channel power amplifier Pro/DJ amp
  • Lcd displays volume in DB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged Mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
  • Parallel Mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in Crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or subwoofer(s). channel a & B clipping LED indicators. Channel a & B separate level controls. Power, Signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles
  • Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-Ohm speakers. Level controls for precise setting and matching of sensitivity. Computer controlled ice protection circuitry against speaker short circuit, Thermal over load, DC over load. User serviceable fuse (15A, 250V). frequency response (bandwidth @ 2VRMS out, @ -3.0dB) 10 Hz – 30 kHz. Thd + noise @ 1kHz full power: <0.03%
  • Input impedance: 10K ohm balanced. Input signal voltage: 660mV – 1.5V. Input sensitivity: 0.7V. Damping factor: ( 100Hz, 10W, 4 ohms): 40.8. Damping factor: (1kHz @ 8 ohm): >400: 1. Effective Damping factor (100Hz, 10W, 4 ohms) 1.08. Output Impedance at speaker terminals: 0.09803 ohms. Frequency response vs THD+N (worst case, across normal bandwidth 1W) 0.11%. signal to noise ratio: > 100dB. Imd 60Hz & 1kHz, 4: 1: <0.04%
Bestseller No. 4
Rockville DBM12 2000W 2 Ohm Marine/Boat Mono Amplifier Amp W/Covers+Bass Remote
  • Rockville dBM12 2000w Peak/500w Dyno-Certified RMS Class-D Mono 2-Ohm Marine Amplifier With Terminal Covers and Bass Remote.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 500 Watts x 1 Channel. 4 Ohm: 300 Watts x 1 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 2000 Watts x 1 Channel. 4 Ohm: 1200 Watts x 1 Channel. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
  • Adjustable Low Pass Filter: 50Hz - 250Hz. Adjustable Subsonic Filter: 15Hz - 55Hz. Adjustable Input Level Control. Fully Adjustable 12dB Bass Equalizer. Minimum THD at Rated Power: <0.1%. S/N Ratio: >90 dB. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 60 Amp Maxi Fuse. Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue). Waterproof silicone covers for end panels. Rustproof Aluminum heatsink with white painted finish.
  • Stainless steel end panels are rustproof. All screws and mounting hardware are stainless steel and rustproof. Bottom panel is aluminum and rustproof. High-Speed MOSFET Power Supply. Optical Coupler Class"D" Technology. Phase Control Switch. Mute and Delay Soft Start System. RCA Preamp Line Output. RCA Input. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Full IC-Controlled Protection Circuitry.
  • Remote Dashboard Subwoofer Control. Product Dimensions (W x H x L): 9? x 2.4? x 13.1? inches. Product Weight: 7.5 Lbs
Bestseller No. 5
Rockville RXM-S30 Micro Marine/ATV Amplifier 2400w Max 4 Channel 4x150w
  • Rockville RxM-S30 2400w / 600w Dyno-Certified RMS 4 Channel Proton Micro Marine Car Amplifier.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 400 Watts (4 x 90 Watts) at 4 ohms and 1% THD+N. 600 Watts (4 x 150 Watts) at 2 ohms < 1% THD. 600 Watts (2 x 300 Watts) bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts (2 x 1200 @ 2 ohms or 1 x 2400 @ 4 Ohms).
  • Marine amplifier with conformal coated PCB board. High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Double Sided Surface Mount (SMD) PCB Design. Selectable +6dB/+12dB Bass Equalizer @ 45hz. Channel Separation: 50 dB. Current drawn @ MAx RMS output: 27A @ 4ohm, 40A @ 2ohm. Efficiency @ MAx RMS output: 65% @ 4ohm, 60% @ 2ohm. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable.
  • Input sensitivity: 20mV-6V. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. THD+A: 0.01%. Frequency Response: 15Hz - 20KHz. Continuously Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Continuously Fully Adjustable
  • High Pass Crossover: 50HZ - 250HZ. CH1 & CH2 High Pass 50Hz - 250Hz. CH3 & CH4 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 250Hz. Full Adjustable Crossover Controls: low pass, high pass, and full pass. Sensitivity: 100dB @ 1w / 1m. S/N Ratio: >90dB. Damping Factor: > 200 @ 100Hz. 2 x 30A Fuses. 7 LBS. Dimensions: (W x H x L) 6.7" x 1.98" x 12.28"
Bestseller No. 6
Rockville RVA-M2 2500w Peak/625w Dyno-Certified RMS @ 1 Ohm Amplifier Mono Car Amp+Remote
  • Rockville RVA-M2 2500w Peak/625w Dyno-Certified RMS @ 1 Ohm Amplifier Mono Car Amp+Remote. Metal Bass Remote Included. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
  • 1 Ohm: 625 Watts(<1% THD @ 14.4 Volts) (70.2% efficient). 2 Ohm: 440 Watts (<1% THD @ 14.4 Volts) (82.4% efficient). 4 Ohm: 264 Watts (<1% THD @ 14.4 Volts) (83.7% Efficient). Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
  • 1 Ohm: 2500 Watts. High-Speed MOSFET Power Supply. Class D Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 32Hz - 300Hz. Subsonic Filter: 10Hz - 50Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry.
  • Adjustable 0-12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. Minimum THD at Rated Power: <0.1%. S/N Ratio: >90dB. Under Voltage Protection at 9V. Over Voltage Protection at 16V. Radiation cooling keeps the amp running at high volumes for hours straight.
  • Extruded aluminum heatsink. Frequency Response: 10Hz - 300Hz. Damping Factor: >150 @ 100Hz. Fuse: 30A*2. Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most power for your money. Dimensions: (L x W x H) 13" x 8.5" x 2.24". Weight: 7 lbs
Bestseller No. 7
Rockville RPM45BT 1800w Powered 4 Channel Mixer/Amplifier w Bluetooth/EQ/Effects
  • Rockville RPM45BT 1800w Powered 4 Channel Mixer/Amplifier with Bluetooth/EQ/Effects.
  • RMS Power Output:. 225w x 2 @ 8 Ohm (Parallel mono). Program Power Output:. 450w x 2 @ 8 Ohm (Parallel mono). Peak Power Output:. 900w x 2 @ 8 Ohm (Parallel mono).
  • Built in Bluetooth with long range and great sound quality. Individual Volume, Reverb, Bass, and Treble controls. Adjustable effects: Echo and delay. USB Input. MP3 Volume control.
  • AUX volume control. Master volume control. 4 balanced XLR inputs. 4 1/4” TRS inputs. 1 RCA AUX input. 1 ¼” master line input. ¼” line output for adding a subwoofer or more amplifiers or powered speakers.
  • 1 RCA Rec output. 1 1/4” Effect loop input/output. Amplified speaker outputs: ¼” TS (8-ohm). +48V phantom power. Fan Vent Cooling System. Dimensions: 18.9” x 8.9” x 6.3”. Weight: 18 lbs.
Bestseller No. 8
Rockville 3000 Watt Peak / 800w RMS 2 Channel Power Amplifier Pro/DJ Amp (RPA9)
  • Rockville RPA9 3000 Watt peak 2 channel professional/DJ rack mount amplifier. 2U rack space
  • Bridged and stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
  • Built in Crossover switch allows make this perfect for speakers, monitors, or subwoofers
  • Channel a & B clipping LED indicators. Channel a & B separate level controls
  • Power, Signal, overload, clipping, and protection LED indicators on front of amp
Bestseller No. 9
Rockville RXA-F1 1600 Watt Peak/400w RMS 4 Channel Car Amplifier+Amp Kit
  • Package Includes: (1) Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp. (1) Rockville RWK41 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's
  • Features of RXA-F1: Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 260 Watts (4 x 65 Watts) at 4 ohms and 1% THD+N
  • 380 Watts (4 x 95 Watts) at 2 ohms < 1% THD. 2 x 200 Watts bridged @ 4 Ohms < 1% THD. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):. 1600 Watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors
  • Fully Adjustable 12dB Bass Equalizer. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. 2 CH / 4 CH Input Mode Switch. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator
  • Rockville RWK41 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit. (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire
Bestseller No. 10
Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS with Status Mode LED Indicator
  • Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
  • CH 1 - 6. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz. Full IC-Controlled Protection Circuitry. Fully Adjustable Bass Equalization Control. 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable@ 4 Ohm. 2 CH / 4 CH/ 6 CHInput Mode Selector. Mute and Delay Soft Start System. Remote Dashboard Subwoofer Control. 8 Volt Preamp Circuitry.
  • ELNA Brand Audiophile Quality Capacitors. Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Minimum THD at Rated Power: < 0.05%. S / N Ratio: > 100dB. Damping Factor: > 200 @ 100Hz. Dual 60 Amp Maxi Fuses. Dimensions: (W x H x L) 8.6" x 2"x 16.1".

Are you Googling for top 10 best rockville amplifier for the budget in 2021? Our AI system had scanned more than 93,844 customer satisfaction about top 10 best rockville amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Rockville RVA-M2 2500w Peak/625w Dyno-Certified RMS @ 1 Ohm Amplifier Mono Car Amp+Remote


Our rating:4.4 out of 5 stars (4.4 / 5)





Solution Description

LogoLogo

Rockville RVA-M2 2500w Peak/625w Dyno-Licensed RMS @ 1 Ohm Amplifier Mono Motor vehicle Amp+Distant

RVA-M2RVA-M2

Functions of RVA-M2:

Rockville RVA-M2 2500w Peak/625w Dyno-Licensed RMS @ 1 Ohm Amplifier Mono Automobile Amp+RemoteMetal Bass Remote IncludedDyno Qualified RMS Electricity Rankings: (Qualified Dyno Exam / A lot less than 1 % THD) (Use these ratings when comparing with prime models this kind of as Kicker, Rockford Fosgate, and many others)1 Ohm: 625 Watts(<1% THD @ 14.4 Volts) (70.2% efficient) 2 Ohm: 440 Watts (<1% THD @ 14.4 Volts) (82.4% efficient) 4 Ohm: 264 Watts (<1% THD @ 14.4 Volts) (83.7% Efficient) Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)1 Ohm: 2500 Watts High-Speed MOSFET Power SupplyClass D TechnologyFully Adjustable 12dB / Octave Crossover with Differential CircuitryLow Pass Filter: 32Hz - 300HzSubsonic Filter: 10Hz - 50HzPhase Control SwitchFull IC-Controlled Protection CircuitryAdjustable 0-12dB Bass EqualizerMute and Delay Soft Start SystemStatus Mode LED IndicatorMinimum THD at Rated Power: <0.1%S/N Ratio:>90dBUnder Voltage Security at 9VOver Voltage Defense at 16VRadiation cooling keeps the amp functioning at large volumes for several hours straightExtruded aluminum heatsinkFrequency Reaction: 10Hz – 300HzDamping Component: >150 @ 100HzFuse: 30A*2Technologies: This sequence utilizes a trusted Course D circuitry that presents you the most dependability and the most powerDimensions: (L x W x H) 13″ x 8.5″ x 2.24″Weight: 7 lbs

1 Ohm: 625 Watts(<1% THD @ 14.4 Volts) (70.2% efficient). 2 Ohm: 440 Watts (<1% THD @ 14.4 Volts) (82.4% efficient). 4 Ohm: 264 Watts (<1% THD @ 14.4 Volts) (83.7% Efficient). Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc).
1 Ohm: 2500 Watts. High-Speed MOSFET Power Supply. Class D Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 32Hz – 300Hz. Subsonic Filter: 10Hz – 50Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry.
Adjustable 0-12dB Bass Equalizer. Mute and Delay Soft Start System. Status Mode LED Indicator. Minimum THD at Rated Power: 90dB. Under Voltage Protection at 9V. Over Voltage Protection at 16V. Radiation cooling keeps the amp running at high volumes for hours straight.
Extruded aluminum heatsink. Frequency Response: 10Hz – 300Hz. Damping Factor:>150 @ 100Hz. Fuse: 30A*2. Technology: This collection employs a trusted Course D circuitry that offers you the most dependability and the most ability for your money. Proportions: (L x W x H) 13″ x 8.5″ x 2.24″. Excess weight: 7 lbs

Leave a Comment