Top 10 Best rockville 5 channel amplifier

Top 10 Rated rockville 5 channel amplifier in 2021 Comparison Table

Bestseller No. 1
Alpine S-A55V 5 Channel Digital Amplifier
  • Features: 5-channel car amplifier,
Bestseller No. 2
Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS with Status Mode LED Indicator
  • Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
  • CH 1 - 6. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz. Full IC-Controlled Protection Circuitry. Fully Adjustable Bass Equalization Control. 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable@ 4 Ohm. 2 CH / 4 CH/ 6 CHInput Mode Selector. Mute and Delay Soft Start System. Remote Dashboard Subwoofer Control. 8 Volt Preamp Circuitry.
  • ELNA Brand Audiophile Quality Capacitors. Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Minimum THD at Rated Power: < 0.05%. S / N Ratio: > 100dB. Damping Factor: > 200 @ 100Hz. Dual 60 Amp Maxi Fuses. Dimensions: (W x H x L) 8.6" x 2"x 16.1".
Bestseller No. 3
Rockville RCS350-6 350 Watt 6 Zone 70V Commercial/Restaurant Amplifier/Bluetooth
  • Rockville RCS350-6 350 Watt 6 zone 70V commercial/restaurant amplifier/Bluetooth
  • Rockville RCS350-6 350 Watt commercial/restaurant amplifier 19" Rack mountable (removable rack brackets) digital hybrid amplifier/receiver Capable of 70 volt 100 Volt 8 ohm and 4 ohm 70/100 volt RMS power 184 watts 6-Zones – each zone has a separate volume control Built in Bluetooth Audio streaming Fm radio tuner Usb input to play audio stored on a thumb drive (32GB max)
  • Sd card slot to play music stored on an SD card (32GB max) separate volume control for Mic1 Mic2 Mic3 MP3 line1 line 2 and MP3 Echo control for the mic inputs with speed and repeat adjustments Built in clipping limiter to protect the amp and speakers Bass and treble control Chime button for making announcements Top quality aluminum panel with industrial grade knobs 5 segments signal level indication Built in cooling system keeps component cool at all times
  • (2) sets RCA aux inputs (3) mic inputs Rca line output 100V speaker red positive speaker output terminal 70V speaker red positive speaker output terminal 8 ohm red positive speaker output terminal Shared negative speaker output terminal
  • Power requirements 120V/ 50-60Hz A weighted signal to noise (@ 1W) -68 1Dba A weighted signal to noise (referenced to full 4 ohm power) -89 2Dba Frequency response 49Hz to 14 9 kHz Frequency response VS thd+m (worst case across normal bandwidth 1W @ 8 ohms 0 89% weight 22 7lbs Dimensions 19” x 16” x 4” inches
Bestseller No. 4
Rockville Atom 8W 8 Channel 3500 Watt Marine/Boat Amplifier Amp w/Bluetooth
  • Rockville ATOM 8W 8 Channel 3500 Watt Peak / 560w Dyno-Certified RMS Marine/Boat Amplifier Amp w/Bluetooth.
  • Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!). Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 3500 Watts Peak System Power. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc).
  • RMS Power Output at 4 Ohms: 70 Watts x 8 Channels. RMS Power Output at 2 Ohms: 110 Watts x 8 Channels. RMS Bridged Power Output at 4 Ohms: 220 Watts x 4 Channels. Voltage display on amp. Configurable to 8, 6, or 4 channels. Bluetooth Wireless with Auto Pairing. RCA Line Output. UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure. 80A Fuse rating!. Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture.
  • Stainless steel end caps, mounting hardware, and bottom plate make this amp truly resistant to the elements. 4CH / 8CH Input Mode Selector. Independent Crossover Controls for CH1-4 and CH5-8. Full Range / Low Pass / High Pass Configurable. Variable High-Pass Filter: 50Hz - 250Hz at 12dB/per Octave. Variable Low-Pass Filter: 50Hz - 250Hz at 12dB/per Octave. Bass Equalization: Fully Adjustable 0 - 12dB at 45Hz. Status Mode LED Indicator. Digital Class D Audio Topology.
  • High Speed MosFET Power Supply. Studio Grade Output Stage Integrated Circuit. Micro Size Architecture with SMD Component Circuitry. Non-Corrosive Black Hairline Finish Aluminum Casing. Conforms to the American Boat and Yacht Council (ABYC) Marine Electronic Standards. 4-Way System Protection Circuitry (DC, Short, Thermal, Overload). Heavy-Duty Aluminum Alloy Heat-sink. Anti-rust RCA Inputs. Anti rust Bolt Down Molded Block Terminals.
Bestseller No. 5
Polk Audio PSW10 10" Powered Subwoofer - Power Port Technology, Up to 100 Watts, Big Bass in Compact Design, Easy Setup with Home Theater Systems Black
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
  • DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete!
SaleBestseller No. 6
Kicker 46CXA6605 Car Audio 5 Channel Amp Speaker & Sub 1200W Amplifier CXA660.5
  • Class A/B full-range channels
  • Class D bass channel included for one amp to run an entire system
  • Three-second turn-on/off delay to eliminate unwanted interference
  • Variable 12dB crossovers provides control to dial in perfect sound
  • KickEQ 6dB variable bass boost for those additional low frequencies
Bestseller No. 7
Planet Audio AC1800.5 5 Channel Car Amplifier - 1800 Watts, Full Range, Class A/B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 300 watts max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 watts max x 4 @4-Ohms plus 5th channel 300 watts max x 1 @-4-Ohms, 600 watts max x 2 bridged @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
SaleBestseller No. 8
Kenwood X802-5 eXcelon 500-Watt Class D 5-Channel Amplifier
  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
SaleBestseller No. 9
Alpine PDR-V75 5 Channel Digital Amplifier - 100W RMS x 4 + 350W RMS x 1
  • PDR Series 5-Channel Class D Car Amplifier | RMS Power Rating: 4 ohms: 75 watts x 4 chan. + 250 watts x 1 chan. | 2 ohms: 100 watts x 4 chan. + 350 watts x 1 chan. Bridged | 4 ohms: 200 watts x 2 chan. + 350 watts. x 1 chan. | CEA-2006 compliant
  • Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section | Variable low-pass filter (50-400 Hz, 24 dB/octave) on sub channel | Variable subsonic filter (8-40 Hz, 24 dB/oct) on sub channel | Variable bass boost (0-12 dB at 50 Hz) on sub channel
  • Preamp and speaker-level inputs (speaker wire to RCA adapter required for speaker-level input) | Class-D amplifier design | MOSFET power and output stages | Fuse rating: 40A x 2 | Dimensions: 10-3/4"W x 2"H x 6-1/2"D
  • All PDR-Power amplifiers are individually tested and have certified power ratings. Each amp comes with their very own verification certificate documenting its actual power output exceeds the rating by a wide margin
  • PDR-Power amplifiers come with a rotatable illuminated badge that makes a very attractive presentation when mounted vertical or horizontally
Bestseller No. 10
Rockville dB15 6000 Watt Peak/1500w RMS Mono 2 Ohm Amplifier Car Audio Amp
  • Rockville dB15 6000 Watt Peak/1500 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). - 2 Ohm: 1500 Watts x 1 Channel <1% THD+N. - 4 Ohm: 900 Watts x 1 Channel <1% THD+N.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). - 2 Ohm: 6000 Watts x 1 Channel. - 4 Ohm: 3600 Watts x 1 Channel.
  • High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz.
  • Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.

Are you looking for top 10 best rockville 5 channel amplifier for your budget in 2021? Our AI system had scanned more than 45,721 customer satisfaction about top 10 best rockville 5 channel amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Rockville RXM-S6 Marine/Boat 2600 Watt 6 Channel Amplifier+PA Microphone+Amp Kit


Our rating:4.6 out of 5 stars (4.6 / 5)





Product Description

Logo

Logo

Rockville RXM-S6 Marine/Boat 6-Channel Amplifier 2600w Peak/1300w RMS+Amp Kit

1

1

Package Includes:

(1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator
(1) Rockville RMWK4 4 AWG Waterproof Marine/Boat Amplifier Installation Wire Kit

_________________________________________________________________________________________________________________________________________________________________

Features of RXM-S6:

Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator
Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD
Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms)
High-Speed MOSFET Power Supply
Studio-Grade Bipolar Output Stage Transistors
Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
CH 1 – 6
Low Pass 50Hz – 250Hz
High Pass 50Hz – 250Hz
Full IC-Controlled Protection Circuitry
Fully Adjustable Bass Equalization Control
2 Ohm Stable Stereo
4 Ohm Mono Bridgeable
3 Channel Mixed-Mono Capable@ 4 Ohm
2 CH / 4 CH/ 6 CHInput Mode Selector
Mute and Delay Soft Start System
Remote Dashboard Subwoofer Control
8 Volt Preamp Circuitry
ELNA Brand Audiophile Quality Capacitors
Status Mode LED Indicator
Frequency Response: 10Hz – 40KHz
Minimum THD at Rated Power: < 0.05%
S / N Ratio: > 100dB
Damping Factor: > 200 @ 100Hz
Dual 60 Amp Maxi Fuses
Dimensions: (W x H x L) 8.6″ x 2″x 16.1″.

_________________________________________________________________________________________________________________________________________________________________

Features of RMWK4:

Rockville RMWK4 4AWG Guage Waterproof Marine/Boat Amplifier Wire Installation Kit
25’ Translucent, Twisted Pair, High Quality, Tinned-CCA Flexible PVC RCA Cable
20’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
4’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
25’ 16 Gauge 100% Tinned-OFC, White, Non-Transparent Resin PVC, Flat Speaker Cable
20’ Blue Remote Wire
1PC Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
1PC 60A Mini-ANL Fuse
2PCS Ring Terminals
2PCS Spade Terminals
5PCS Speaker Cable Terminals
1PC Washer
10PCS White Cable Ties

Package Includes: (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator
Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ‘ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18′ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment.
18′ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable. 25′ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable. 25′ Blue Remote Wire. (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring. (1) 120A Mini-ANL Fuse.
(1) 80A Mini-ANL Fuse. (2) Ring Terminals. (2) Spade Terminals. (5) Speaker Cable Terminals. (1) Washer. (10) White Cable Ties
Features of RXM-S6: Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD.

Leave a Comment