Top 10 Best rgb amplifier

Top 10 Best rgb amplifier in 2021 Comparison Table

Bestseller No. 1
SUPERNIGHT DC 12V to 24V 12A LED Strip Lights 3 Channels RGB Signal Amplifier Repeater for 10m 4 Pin 5050 3528 LED String Lights - 2 Pieces Pack
  • Used for all SUPERNIGHT RGB LED controller
  • Enhancing RGB signal for RGB LED strip lights more than 32ft
  • Extending LED strip lights and keep the RGB signal strong enough perfectly
  • PWM signal can be also accepted and amplified
  • 0utput: 3 Channels
Bestseller No. 2
SUPERNIGHT (TM) Data Repeater RGB Signal Amplifier for SMD 3528 5050 LED Strip Light, DC 12V 12A
  • Brand Name : SUPERNIGHT
  • RGB Amplifier is used for all our company RGB LED controller.
  • In theory , RGB amplifier can be connected to numerous.
  • It can accept PWM signal.
  • When adding one RGB amplifier, it can connect to more than double of the number led lights.
Bestseller No. 3
LEDENET RGB High Speed Power Amplifier 24A Data Signal Repeater 3CH Channels For 5050 LED Lights Strip
  • Amplifier the red, green, blue three group signal of 3 channel controller. improve the system with load capacity.
  • Supply voltage: DC12V/24V. Output:3 channel. Max Load Current: 8A for each channel. Total Output of Current: 24A.
  • Output power:max 288W(12V), max 576W(24V)
  • The input voltage is DC 12-24V, and can't connect to other voltage
  • Brand: LEDENET
Bestseller No. 4
LED RGB Amplifier Controller DC12V/24V 30A Aluminum Signal Repeater 360W for 5050 LED Strip Light Signal Amplifier
  • Small RGB amplifier applies to all the voltage-controlled LED controller ,it can receiv PWM(Pulse Width Modulation), each time add one RGB amplifier, the connecting number of led will be than twice, in theory, numerous RGB amplifiers can be connected
  • Each time add one RGB amplifier, the connecting number of LEDs will be more than twice
  • To make us of this product you will need an AC-DC Adapter or Car Battery. Works with voltages 10V-14V. Offers two voltage inputes, A. by round adapter plug or B. By bare wire to 2 terminals V+/-
  • Use control 5050 RGB Led strips 50 Meters with 30Leds/Meter, or 5050 RGB Led Strips 25 Meterswith 60Leds/Meter, or 3285 RGB Led Strips 75 Meters with 60Leds/Meter
Bestseller No. 5
GLC RGBW/RGB High Speed Power Amplifier 40A Data Signal Synchronization Repeater 4CH Channels for LED2835/5050 5V-24V
  • RGBW/RGB High Speed Power Amplifier 40A the white, red, green, blue four group signal of 4 channel controller.improve the system with load capacity
  • Supply voltage: DC5-24V
  • Max Load Current: 10A for each channel. Total Output of Current: 40A
  • Output:4 channel. Output power:max 200W(5V), max 480W(12V), max 960W(24V)
  • 24-month Warranty
Bestseller No. 6
BTF-LIGHTING RGB/RGBW 5050 LED Strip Amplifier Controller Work with 4pin/5pin DC12V/DC24V 5050SMD LED Strip
  • 【Used for RGB/RGBW LED Strip】Used for: DC12V 4 pin 5050 RGB, DC12V 5pin RGBW LED strip ,DC24V 4 pin 5050 RGB, DC24V 5pin RGBW LED strip .The amplifier is common anode .
  • 【Extends RGBW Signal.It extends the RGBW Signal】Use one amplifier every 32FT for your RGBW LED strip project .
  • 【For monochromatic color LEDs】This is normally used for RGBW LED lights, but also you can use it for monochromatic/simple color LED (connecting each color on inch channel).
  • 【DC 12V/24V power supply】Multiple Amplifiers can be used in a daisy chain. You can use DC12V24A for the amplifier when you control DC12V RGBW/RGB LED strip. Using DC24V24A for the DC24V RGBW/RGB LED strip.
  • 【For your LED strip.Powerful functions and small size】 It's the best mate for your LED strips. Adding voltage for the LED strip .
Bestseller No. 7
GLC 540W 5V-24V 45A RGB LED Amplifier Controller
  • Type:LED Controller/Amplifier
  • Style : LED Strip controller
  • 5V-24V 45A RGB LED Amplifier Controller
  • Amperage:15A*3ch(DC5V<200W,DC12V<540W,DC24V<1080W)
  • Function: It is used to receive from LED controller and send the signal to another group of LED source
Bestseller No. 8
LEDENET RGBW Amplifier 24A Data Signal Repeater 4CH Channels Circuit Aluminum Shell For RGBWW LED Lights Strip 12V 24V
  • It is used to receive RGBW signal from LED controller and send the signal to another group of LED source.
  • Supply voltage: DC12V/24V
  • Max Load Current: 6A for each channel. Total Output of Current: 24A.
  • Output:4 circuit
  • Output power:max 288W(12V), max 576W(24V)
Bestseller No. 9
RGBZONE DC 5V~24V SP901E SPI Signal Amplifier Repeater for WS2812B WS2811 WS2813 SK6812 WS2815 WS2801 RGB Addressable LED Pixel Strip Light and Dream Color Programmable LED Matrix Panel Light
  • The SPI signal amplifier is compatible with all kinds of 5V-TTL signal. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.
  • It can outputs 8 channels for addressable LED strips with single data wire, such as WS2812B, WS2811, SK6812, SK6812-RGBW,SM16703, etc.
  • You can use one controller to control DC5V WS2812B and DC5V WS2813 LED strip at the same time, control DC12V WS2811 ,DC12V WS2815, DC12V 1903, DC12V 6803 at the same time via this singal amplifier since they have the same singal.
  • DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your led lights.
  • Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects.
Bestseller No. 10
ALITOVE WS2812B WS2811 SPI Signal Amplifier Repeater, for WS2813 SK6812 WS2815 WS2801 RGB Addressable LED Pixel Strip Light and Dream Color Programmable LED Matrix Panel Light DC 5V~24V (SP901E)
  • The SPI signal amplifier is compatible with all kinds of 5V-TTL signal. It receives one signal and simultaneously output 4 or 8 channels of signals. Each channel can control the same quantity of LED pixels as main controller.
  • It can outputs 8 channels for addressable LED strips with single data wire, such as WS2812B, WS2811, SK6812, SK6812-RGBW,SM16703, etc
  • It can outputs 4 channels for addressable LED strips with data & clock wires or dual data wires, such as WS2813, WS2815, CS8812, AL2815, WS2801, APA102, SK9822,etc
  • DC5V~24V wide range of working voltage, but it cannot regulate the output voltage. That means the output voltage of power supply must be the same as the work voltage of your led lights.
  • Multiple signal amplifiers can be cascaded together synchronously. Particularly suitable for small and medium dream color lighting projects.

Are you looking for top 10 best rgb amplifier for the budget in 2021? Our AI system had scanned more than 55,827 customer satisfaction about top 10 best rgb amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: SUPERNIGHT DC 12V to 24V 12A LED Strip Lights 3 Channels RGB Signal Amplifier Repeater for 10m 4 Pin 5050 3528 LED String Lights – 2 Pieces Pack


Our rating:4.5 out of 5 stars (4.5 / 5)





Merchandise Description

Features:

*Utilized for RGB LED controller
*Improving RGB signal for RGB LED strip lights more than 32ft
*Extending LED strip lights and maintain the RGB sign sturdy enough beautifully
*PWM sign can be also recognized and amplified

Speacifications:

Functioning temperature: -20-60℃
Provide voltage: DC5V, 12V,24V optional (specify the demanded voltage on orders)
0utput: 3 channels
Connecting mode: typical anode/cathode optional (specify the expected voltage on orders)
Exterior dimension: L104.6*W63.5*H24.8 mm
Packing dimensions: L117*W71*H36 mm
Net bodyweight: 110g
Gross bodyweight: 140g
Static power use: <1W 2. Uses a separate switching power supply for amplifier, the effect is even better.
Lead wire should be connected correctly according to grade that connecting diagram offers.

Used for all SUPERNIGHT RGB LED controller
Enhancing RGB signal for RGB LED strip lights more than 32ft
Extending LED strip lights and keep the RGB signal strong enough perfectly
PWM signal can be also accepted and amplified
0utput: 3 Channels

Leave a Comment