Top 10 Best qsc power amplifier

Top 10 Best qsc power amplifier in 2021 Comparison Table

Bestseller No. 1
QSC RMX1450a Stereo Power Amplifier
  • Requires 2 rackspaces
  • 1/4" TRS, XLR, and barrier strip balanced inputs
  • Binding post and Neutrik Speakon outputs
  • Front-mounted gain controls for easy access
  • Independent and defeatable clip limiters
Bestseller No. 2
QSC PLD 4.2 700 Watt Four Channel Power Amplifier
  • Four channels of full function onboard loudspeaker DSP with crossover and parametric EQ filters
  • Powerful Intrinsic Correction processing maximizes the sonic performance of QSC loudspeakers
  • 20 factory preset configurations that can be modified and stored in the 50 user presets
  • PowerLight universal switch mode power supply with PFC for highest efficiency, improved audio performance, and low weight
  • Four input XLR connectors and six NL4 output connectors
Bestseller No. 3
QSC ISA800Ti Power Amplifier 2 Channel 450 Watts per CH 8 Ohms Stereo Amp w 70 Volt Transformer
  • 25-, 70-, 100 volt, and low impedance outputs available simultaneously
  • Independent defeatable clip limiters for reduced distortion
  • Rear panel gain controls for tamper resistance
  • Selectable 30 Hz or 70 Hz high-pass filters protect
  • Class H output circuitry reduces heat and AC power draw by 40% on ISA 800Ti
Bestseller No. 4
QSC GXD8 Class D Power Amplifier with DSP
  • High peak output power with up to 4500 watts
  • Class D output stage with a universal power supply for high performance and efficiency
  • Includes high and low-pass filters, 4-band parametric EQ, limiting, and delay
  • Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capability
  • Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections
Bestseller No. 5
QSC A-B Box, MultiColored (GX7)
  • 2 x balanced XLR and 1/4-inch TRS (one on each channel)
  • RCA phono connectors
  • Speak on combo XLR/TRS connectors (on each channel)
Bestseller No. 6
Crown XTi1002 Two-channel, 500-Watt at 4Ω Power Amplifier
  • Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and full speed – for matching fan performance to a specific application
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Input: XLR (x2); Output: XLR (x2), Speakon (x2), Binding Post (x2 pair)
Bestseller No. 7
Crown XLi1500 Two-channel, 450-Watt at 4Ω Power Amplifier
  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0. 775V and 1. 4V
  • Electronically balanced RCA & XLR inputs; binding post and Speak on outputs
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Bestseller No. 8
Crown XLS1002 Two-channel, 350-Watt at 4Ω Power Amplifier
  • Class D amp with Crown ultra-efficient drive Core technology weighs less than 11 lb. (5 kg)
  • Higher DSP capabilities: more control; has band pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4VRMS and .775VRMS options so that amp can be driven At full power
  • Set sleep mode after specified time without having to press a button
Bestseller No. 9
Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp
  • Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
  • Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: <0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V.
  • Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): >400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: > 100dB, IMD 60Hz & 1kHz, 4: 1: <0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch.
  • Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max.
Bestseller No. 10
Crown CDi 1000 Two-Channel, 500-Watt @ 4Ω, 70V/140V Power Amplifier
  • Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
  • Switch-mode universal power supply
  • Intuitive front-panel LCD screen for quick, easy configuration
  • Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
  • Up to 20 user defined DSP presets are available

Are you finding for top 10 great qsc power amplifier for your budget in 2021? Our AI system had scanned more than 62,515 customer satisfaction about top 10 best qsc power amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: QSC GX3 300-Watt Power Amplifier


Our rating:4.6 out of 5 stars (4.6 / 5)






GX Sequence amplifiers are perfect for experienced entertainers who demand maximum general performance and portability on a minimal price range. QSC designers, headed by Pat Quilter, have optimized output and visual appeal even though lowering uncooked materials expense and excess weight. It&aposs all right here remarkable styling, easy hookup and changes, exceptional audio high quality and QSC dependability. GX amplifiers deliver just the proper quantity of energy to the most well-known speakers utilised by entertainers. Most loudspeaker manufacturers propose an amplifier with electricity output equal to the speaker&aposs “System (Music) Energy” ranking or two times (2 x) the “Constant (RMS) Energy” ranking. The GX3 is ideal for speakers in the 300 watt (System) range, supplying maximum probable electric power to 4 ohm and 8 ohm hundreds.Technological NotesThe GX3 uses the latest evolution of the QSC Grounded Collector output technique, for ideal cooling of the crucial electric power transistors. A true Class B biasing technique combines optimum thermal efficiency with great audio efficiency. GuardRailGuardRail safety delivers complete peak electric power while stopping harmful overloads. For the duration of extreme clipping, or excessive overheating, GuardRail lessens gain just more than enough to preserve the integrity of the songs, defend the speakers and hold the viewers psyched, without the need of unprofessional distortion amounts or shutdowns. Subwoofer/Satellite Crossover A subwoofer lowers pressure on the total-variety speaker, allowing it to engage in louder, or allowing a more compact speaker do the exact same career. The GX Sequence supports this method with a Crossover change that splits the entire-range enter coming into Ch 1, sending 20 Hz – 100 Hz to the sub (Ch 1) and 100 Hz – 20 kHz to the major box (Ch 2). The entrance panel gain controls stability the sub and prime box, when GuardRail optimizes peak electrical power into the sub and prime independently, for increased musical effects and dynamic array.Capabilities:Ability degrees matched to the most well-liked speakers applied by entertainers Optimized for maxi…

I/O Made for Present-day Programs
GuardRail: QSC’s Proprietary Heat and Quantity Achieve Limiter

Leave a Comment