Top 10 Best marine amplifier 6 channel

Top 10 Rated marine amplifier 6 channel in 2021 Comparison Table

Bestseller No. 1
Garmin Fusion Signature Series 6 Channel 1500-Watt Marine Amplifier, a Brand
  • Class-D amplifier design delivers higher efficiency and greater output.
  • Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.
  • Conformal coated PCBs provide extra protection from the marine elements.
  • Rigid aluminum alloy heat sink is molded for greater dissipation of heat.
  • The amplifiers are available in monoblock, 4-channel, 5-channel, 6-channel and 8-channel configurations.
Bestseller No. 2
Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS with Status Mode LED Indicator
  • Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 420 Watts (6 x 70 Watts) at 4 ohms and 1% THD+N. 660 Watts (6 x 110 Watts) at 2 ohms < 1% THD. 660 Watts (3 x 220 Watts) bridged @ 4 Ohms < 1% THD.
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2600 Watts (6 x 440 @ 2 ohms or 3 x 880 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry.
  • CH 1 - 6. Low Pass 50Hz - 250Hz. High Pass 50Hz - 250Hz. Full IC-Controlled Protection Circuitry. Fully Adjustable Bass Equalization Control. 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable@ 4 Ohm. 2 CH / 4 CH/ 6 CHInput Mode Selector. Mute and Delay Soft Start System. Remote Dashboard Subwoofer Control. 8 Volt Preamp Circuitry.
  • ELNA Brand Audiophile Quality Capacitors. Status Mode LED Indicator. Frequency Response: 10Hz - 40KHz. Minimum THD at Rated Power: < 0.05%. S / N Ratio: > 100dB. Damping Factor: > 200 @ 100Hz. Dual 60 Amp Maxi Fuses. Dimensions: (W x H x L) 8.6" x 2"x 16.1".
Bestseller No. 3
Wet Sounds HTX-6 Class D 6 Channel Marine Amplifier
  • Features: HTX Series 6-Channel Class D Marine Amplifier. RMS Power Rating: 4 ohms: 100 watts x 6 chan. | 2 ohms: 150 watts x 6 chan. | Bridged, 4 ohms: 300 watts x 3 chan. | Total power output: 900 watts RMS. CEA-2006 Compliant Amplifier, Pulse Width Modulated MOSFET power supply, LED power (blue) and protect (red) indicators, Removable crossover/level control cover, Removable wire terminals/plugs.
  • Conformal coated PCB boards, Completely sealed, salt-water compliant high mass heat sink, Fully stainless steel hardware, Soft start turn-on, 6, 5 or 3 channel operation, 3-way protection circuitry (thermal, overload, and speaker short protection), Dual speaker terminals simplify the hookup of multiple speakers, Heavy duty aluminum alloy heat-sink for extreme heat dissipation, Input sensitivity: 200mV - 6.1V.
  • Frequency Response: 7 - 33,000 Hz, Total Harmonic Distortion (THD): <1.0%, Signal to Noise Ration: >85 dB (75watts @4ohms), Selectable Crossover Modes (Ch1-6): Low / High, Variable crossover filter: 50 - 250 Hz, 12 dB/octave, Fuse Rating: 40 A x 2, Speaker connections accept 12 - 16 AWG wiring, Dimensions: 7.126"W x 13.230"L x 3.000"H.
Bestseller No. 4
6 Channel Marine Amplifier Receiver - Waterproof Wireless Bridgeable Audio Amp for Stereo Speaker with 2000 Watt Power Dual MOSFET Supply, GAIN Level, RCA Inputs and LED Indicator - Pyle PLMRA620
  • 6 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA620 is engineered as a 6 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It has a bridge mode selection switch and high or low electronic crossover network
  • WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-01. It’s constructed with gold-plated stereo speaker output terminal connectors to combat weather corrosion with long-term us
  • SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
  • POWERFUL 2000 WATT: This amplifier receiver is powerful with its 2000 WATT MAX and dual MOSFET power supply. Comes with dual adjustable input GAIN level controls between 4 to 8 Ohm speaker impedance
  • RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs
Bestseller No. 5
NVX MVPA6 Marine-V Series 6-Channel Bridgeable Micro Class D Compact Car Amplifier | 900W Total RMS
  • Don’t let the size fool you! The Marine-V Series Amplifiers packs a massive punch when it comes to power. Here at NVX, we know how important space is when installing anything aftermarket. The Marine-V Series Amps are capable of being installed anywhere and everywhere in your vehicle. Whether you are installing it in your motorcycle, UTVs, ATVs, boats, and golf carts, the Marine-V Series Amps will take up little space.
  • The Marine-V Series Amplifiers are created for outdoor vehicles. We want to make sure your amplifier is safe no matter the application. Most amplifiers on the market claim to be meant for boats, motorcycles, and other outdoor vehicles, but lack any real measures to protect their amps. Here at NVX, our marine amplifiers are truly ready for the elements and have an IPX67 waterproof rating.
  • The Marine-V Series amps are Class-D amplifiers, meaning they run at or over 90% efficiency. This efficiency is extremely high compared to Class-A/B amps, which run at less than 78% efficiency. So, what does this mean for you? This translates to smaller heat shrinks, less power draw from your vehicle’s charging system, and it makes smaller internal components possible, allowing the overall footprint of the amplifier to be smaller as well.
  • All Marine-V Series Amplifiers are fitted with 3.5mm AUX signal input to work seamlessly with our NVX Bluetooth controllers (like the XUBT4 or XUBT3). This also allows you to have a direct connection to your device’s headphone jack. As an added bonus, all Marine-V Series Amps come with a bass knob, allowing you to have full usage of a subwoofer if you decide to bridge two channels together.
  • General Features: RMS Power Rating: 4 ohms: 100 watts x 6 chans. / 2 ohms: 150 watts x 6 chans. / Bridged, 4 ohms: 300 watts x 3 chans. / Class-D FullRange 6-Channel Amplifier / Heavy-duty aluminum alloy heat-sink OR high-density split-dome convection heat-sink for extreme heat dissipation
SaleBestseller No. 6
2.1 Bluetooth Marine Amplifier Receiver - Waterproof 6 Channel Wireless Bridgeable Audio Amp for Stereo Speaker with 2000 Watt Power Dual MOSFET Supply GAIN Level and LED Indicator - Pyle PLMRA630BT
  • 6 CHANNEL BRIDGEABLE AMPLIFIER: Pyle’s PLMRA630BT is engineered as a 6 Channel bridgeable marine amplifier that powers up your speaker and is universally compatible. It has a bridge mode selection switch and high or low electronic crossover network
  • 2.1 BLUETOOTH CONNECTIVITY: Built with 2.1 Bluetooth connectivity that has a wireless range of 25+ feet. Compatible with all Bluetooth devices like iPhone, Android, iPad and tablets. It even has a smart auto connect that remembers device pairing info
  • WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-01. It’s constructed with silver-plated stereo speaker output terminal connectors to combat weather corrosion with long term us
  • SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions
  • POWERFUL 2000 WATT: This amplifier receiver is powerful with its 2000 WATT MAX and dual MOSFET power supply. Comes with dual adjustable input GAIN level controls between 2 to 4 Ohm speaker impedance
Bestseller No. 7
Rockville New RXM8BTB 8 Channel 1500 Watt Marine/Boat Amplifier Amp w/Bluetooth
  • Rockville RXM8BTB 1500 Watt Peak/750w Dyno-Certified RMS Marine 8 Channel Digital Class D Power Amplifier with Bluetooth Wireless Integration
  • Features: Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!). Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 1500 Watts System Power. Peak Bridged Power Output at 4 Ohms: 380 Watts x 4 Channels..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). RMS Power Output at 4 Ohms: 65 Watts x 8 Channels . RMS Power Output at 2 Ohms: 95 Watts x 8 Channels. RMS Bridged Power Output at 4 Ohms: 190 Watts x 4 Channels.
  • Configurable to 8-6-4 channels or 4.2 System. Bluetooth Wireless with Auto Pairing. UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure. Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture. LED Power and Protect Indicators. TI Digital Class D Audio Topology. High Speed MosFET Power Supply. Studio Grade Bipolar Output Stage Transistors. Micro Size Architecture with SMD Component Circuitry. Compact Design and High Power.
  • Non-Corrosive High Gloss White Aluminum Casing. Selectable Bass. Non-Corrosive Brushed Aluminum Casing. Conforms to the American Boat and Yacht Council (ABYC) Marine Electronic Standards. Bass Equalization: Fully Adjustable 0 - 12dB at 45Hz. 4-Way System Protection Circuitry (DC, Short, Thermal, Overload). Heavy-Duty Aluminum Alloy Heat-sink. Stainless Steel RCA Level Inputs. Stainless Steel Bolt Down Molded Terminals. 4CH / 8CH Input Selector Mode.
Bestseller No. 8
Pyle 6-Channel Audio Marine Amplifier - Compact Power 600 Watt RMS 4 OHM Full Range Stereo with Volume Bass Treble Rotary Control - Wireless Bluetooth Receiver Speaker & LCD Digital Screen
  • ADJUSTABLE TREBLE BASS EQ: Bass signal output can operate independently and the bass amplitude range is fine-tuning. The subwoofer output is controlled separately. May appropriate to adjust the style effect according to your needs for sound effect.
  • HIGH-FIDELITY STEREO DESIGN: Pyle 6-channel subwoofer amplifier with 600 watt RMS at 4 ohm impedance and frequency range between 10-40kHz for unrivaled sound superiority. Compact marine grade rating at IP-41, class D circuit and RCA audio connector.
  • WIRELESS BLUETOOTH CONNECT: Built in 2.1 version and that ranges up to 50’ + feet and has thermal power protection circuitry and variety spring loaded speaker terminal. Also, installed with HD sound and LED digital screen that your stereo is working.
  • AUXILIARY INPUT: Save MP3 audio files to a memory card and play back through the USB or SD card reader pair of RCA jacks on the rear of the amplifier, to external smartphone, computer, MP3, laptop or tablet. Connect and stream from external devices.
  • QUALITY PACKAGE: It has multi channel, a perfect separate subwoofer output, volume, treble and bass, which can be accessed in the side panel button control center. It is made durable marine grade construction and heavy duty aluminum alloy heatsink.
Bestseller No. 9
Pyle 6-Channel Audio Marine Amplifier - Compact Power 600 Watt RMS 4 OHM Full Range Stereo with Volume Bass Treble Rotary Control - Wireless Bluetooth Receiver Speaker & LCD Digital Screen PFMRA640BB
  • ADJUSTABLE TREBLE BASS EQ: Bass signal output can operate independently and the bass amplitude range is fine-tuning. The audio amplifier output is controlled separately. May appropriate to adjust the style effect according to your needs for sound effect
  • HIGH-FIDELITY STEREO DESIGN: Pyle 6-channel audio amplifier with 600 watt RMS at 4 ohm impedance and frequency range between 10-40kHz for unrivaled sound superiority. Compact marine grade rating at IP-41, class D circuit and RCA audio connector
  • WIRELESS BLUETOOTH CONNECT: Built in 2.1 version and that ranges up to 50’ + feet and has thermal power protection circuitry and variety spring loaded speaker terminal. Also, installed with HD sound and LED digital screen that your stereo is working
  • AUXILIARY INPUT: Save MP3 audio files to a memory card and play back through the USB or SD card reader pair of RCA jacks on the rear of the amplifier, to external smartphone, computer, MP3, laptop or tablet. Connect and stream from external devices
  • QUALITY PACKAGE: It has a multi channel, a perfect separate audio amplifier output, volume, treble and bass, which can be accessed in the side panel button control center. It is made of durable marine grade construction and heavy duty aluminum alloy heatsink
Bestseller No. 10
KICKER 48KMA6006 600 Watt 6-Channel Marine Amplifier Boat Amp KMA600.6
  • Features: Ultra-Efficient Class D Design, 750 Watts of Dynamic Power, Three Zones of Control, Six-Channel Amplifier with Bridging Capability.
  • Conformal-Coated Circuit Board, Variable 12dB Crossover, KickEQ Variable 6dB Bass Boost, Real Marine ABYC/NMMA-Compliant Power Connections, 316L Stainless-Steel Hardware Included.
  • Specifications: POWER [watts/ch], 2 OHM STEREO: 100 x 6, POWER [watts/ch], 4 OHM STEREO: 50 x 6, POWER [watts/ch], 4 OHM BRIDGED MONO: 200 x 3, DYNAMIC POWER [watts]: 750, Dimensions [in] all models 2-5/16H x 7-1/8W x (L: 13-15/16), Dimensions [cm] all models 5.9H x 18.0W x (L: 35.3), FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB.
  • INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V, SIGNAL-TO-NOISE RATIO: 95dB, a-weighted, re: rated power.
  • ACTIVE CROSSOVER: (amp 1 and amp 2) 12dB/octave, variable 0-200Hz, HP only; (amp 3) 12dB/octave, variable 50-200Hz, Off/HP/LP, SUBSONIC FILTER: (amp 3 only) 24dB/octave, high pass fixed @ 25Hz, KickEQ BOOST: (amp 3 only) Variable 0-6dB, centered @ 40Hz.

Are you looking for top 10 great marine amplifier 6 channel for the budget in 2021? Our AI system had scanned more than 32,559 customer satisfaction about top 10 best marine amplifier 6 channel in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: 6-Channel Bluetooth Audio Marine Amplifier – 600 Watt Power Compact Weather Resistant Audio Amp Wireless Receiver System W/ MP3, USB, SD Reader, Volume Bass Treble Control, LCD Digital Screen – Pyle


Our rating:4.8 out of 5 stars (4.8 / 5)






Capabilities: – 6-channel audio amplifier – rugged & durable Maritime quality construction – Bluetooth receiver for wireless songs streaming ability – USB flash & SD memory card viewers – MP3 digital audio file compatibility – Lcd electronic show display – RCA (L/R) audio connectors – spring-loaded speaker terminals – hook up & stream Audio from external products – large duty aluminum alloy heatsink – Side panel button control center – volume, bass, treble rotary controls – Built-in thermal, overload & speaker shorter defense – features wall electricity adapter – energy on/off swap Bluetooth wi-fi connectivity: – operates with all of today’s hottest Gadgets – laptops, desktops, smartphones, tablets, and so on. – intelligent vehicle link pairing potential – Bluetooth Version: 2.1 – Bluetooth community name: Pyle – Wireless assortment: 50’+ ft. Complex Specs: – Max electric power: 600 Watt (100W x 6) – amplifier type: Course-D circuit – marine quality score: ip-41 – impedance: 4 ohm – Frequency response: 10 – 40Khz – Channel separation: > 65Db – T.H.D.: 95Db – optimum USB Flash aid: 32GB – electronic audio file support: MP3, WMA, WAV – power: 110/220V (DC 12.5V ability adapter) – dimensions (L x w x H): 11.8’’ x 9.8’’ x 2.1’’
600 Watt electricity: The Pyle 6-channel subwoofer amplifier Features 600 Watt RMS at 4 Ohm impedance and frequency variety involving 10-40kHz for unrivalled seem superiority with maritime quality waterproof ranking of IP-41, course D circuit and RCA Audio connector
Adjustable equalizer: the Bass sign output can operate independently and the bass amplitude array is wonderful-tuning. The subwoofer output is managed separately. May well appropriate to modify the style outcome in accordance to your desires for sound influence
Usb/SD card reader: enables you to play MP3 audio documents from a USB flash push or memory card. The USB and SD memory card reader are both equally located on the rear of the amplifier. Link and stream your beloved audio documents from your external units
Bluetooth connectivity: equipped w/ constructed-in Bluetooth 2.1 that ranges up to 50+ ft and has thermal electrical power protection circuitry and wide variety spring loaded speaker terminal. Also, mounted w/ Hd sound and LED indicator that your stereo is doing the job

Leave a Comment