Top 10 Best kenwood 4 channel amplifier

Top 10 Best kenwood 4 channel amplifier in 2021 Comparison Table

Bestseller No. 1
Kenwood X302-4 eXcelon 50 Watts x 4 4-Channel Class D Amplifier
  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
  • The amplifier design is Class D, which uses digital switching power supplies. The result is the amplifier runs more efficiently, generating less heat than Class AB amps. The Class D design also allows the amplifier to be built on a small chassis, and installed where space is limited.
Bestseller No. 2
Kenwood KAC-M1814 4-Channel Compact Bridgeable Marine/Motorsports 400W Max Power Digital Amplifier
  • Digital Amplifier Technology
  • Speaker Level Input w/ Signal Sensing Turn-on
  • 2 Ohms Load Capability
  • Power MOS-FET Switching Power Supply
  • 1m (3.3ft) RCA Cable
Bestseller No. 3
Kenwood KAC-M3004 Compact 4 Channel Digital Amplifier
  • Rms power
  • 4o: 50 watts x 4
  • 2o: 75 watts x 4
  • Peak power: 600 watts
  • Signal sensing turn-on
Bestseller No. 4
Kenwood XR401-4 eXcelon 400-Watt 4-Channel Amplifier
  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music.
  • Special capacitors and inductors have been carefully selected for the digital amplifier’s LC filter which is essential for achieving highresolution audio.
  • Operating Voltage: 14.4V (11 - 16 V allowable)
SaleBestseller No. 6
Kenwood 1177524 Compact Automotive/Marine Amplifier Class D Kac-M1824BT, 180W RMS, 400W PMPO, 4 Channel
  • New Kenwood 4 channel Bluetooth marine atv motorcycle amplifier (kacm1824bt)
  • 45 watts x 4 at 4 ohms
  • Peak power: 400 watts
Bestseller No. 7
Kenwood 2156568 KAC-M1804 Compact 4-Channel Amplifier
  • Kac-m1804 - Kenwood 4-channel 400w class d compact digital car amplifier
  • Rms power rating: 4 ohms: 45 watts x 4 Chan, max power output: 400 watts
  • Conformal coated circuit board suitable for marine applications
  • Extruded aluminum heat sink design
Bestseller No. 8
Kenwood Excelon P-XR600-6DSP 6-Channel Car Amplifier with Digital Signal Processing and Maestro AR Interface
  • Many new cars equipped with premium amplified systems are nearly impossible to replace and very difficult to upgrade the audio performance. The XR600-6DSP when combined with an iDatalink Maestro AR can use a true stereo signal from the existing OEM stereo and translate all the CAN-Bus communication of the original radio to the XR600-6DSP. Integrates with many Chrysler, Dodge, Fiat, Ford, Jeep, Lexus, Maserati, Ram, Subaru and Toyota premium systems, with more vehicles to follow.
  • Use the KENWOOD DSP Control App (compatible with iPhone and Android) to setup the XR600-6DSP. The listening position, advanced equalization and filtering can be set during installation and the setting stored in memory. A simplified mode is available for day to day use.
  • The 32-Bit 192kHz DSP gives the flexibility of independent tuning and equalization that is required with the variance of speakers and location challenges being used in a typical system. The channel flexibility allows any function or tuning on all 10 channels making it one of the most versatile solution based amplifiers on the market today.
  • These HEX-type terminals can accommodate up to AWG 8 - AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire.
  • These HEX-type terminals can accommodate up to AWG 4 - AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle's battery. The HEX type design allows for maximum tightening and contact onto the wire.
SaleBestseller No. 9
Kenwood X802-5 eXcelon 500-Watt Class D 5-Channel Amplifier
  • High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.
  • Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
  • Detachable sliding terminal cover offers a sleek design and easier installation.
  • All terminals and connections are on one side for easier installation and a cleaner look.
  • Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.
Bestseller No. 10
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Are you looking for top 10 rated kenwood 4 channel amplifier for the money in 2021? We had scanned more than 62,463 customer satisfaction about top 10 best kenwood 4 channel amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Kenwood XR401-4 eXcelon 400-Watt 4-Channel Amplifier


Our rating:4.2 out of 5 stars (4.2 / 5)





Products Description

XR401-4

XR401-4

XR401-4

XR401-4

Kenwood Excelon XR401-4 Reference Sequence 4-channel motor vehicle amplifier

Thoroughly clean energy can completely transform a mediocre seem procedure into a wonderful one particular. Kenwood’s Excelon Reference Series XR401-4 4-channel amplifier will add clarity and punch to your seem, as it powers each of your front and rear speakers with 75 watts RMS. If you’re introducing bass very first, you can use the amp in 2-channel manner to drive a couple of subwoofers with up to 200 watts RMS each. Then afterwards you can swap the amp more than to your main speakers when you get a sub amp. The XR401-4 can match in numerous diverse sites in your motor vehicle simply because of its exceptionally minimal profile — it’s less than 1-1/2″ tall.

XR401-4

XR401-4

Substantial-resolution tunes

This Excelon Reference Collection amplifier has extremely-substantial-frequency reaction up to 40,000 Hz, reproducing sounds that assist determine audio tone and room even however beyond the selection of listening to. Resolve this amp up with a awesome set of Kenwood large-res Reference Collection speakers, and you can take pleasure in the extended element and impressive musical imaging of your superior-res FLAC or DSD information.

XR401-4

XR401-4

Developed for ideal performance

Kenwood packed this amp with area-saving options. Class D technological know-how lowers the dimensions of the electric power supply, while the inside heatsink is tilted to decrease top with out compromising the amp’s cooling technique. Recessed power and speaker wire terminals aid to even more minimize the amp’s footprint, secure the connections, and give your installation a neat, specialist glance.

XR401-4

XR401-4

Specialised Circuit Design

The sound reduction method employs a unique structure that separates the analog circuit, electronic amplifier circuit and electric power offer circuit. This retains interference amongst the circuits to a minimum amount, decreasing sounds and therefore obtaining large performance and sound high quality.

XR401-4

XR401-4

CTA-2006 Compliant

CTA-2006 is a procedure of tests and measurement approaches for mobile audio amplifiers. This voluntary regular advocates a uniform technique for measuring an amplifier’s RMS electrical power output and sign-to-noise ratio. The conditions for measuring ability employs a DC enter voltage of 14.4 volts and the RMS power output is calculated into a 4-ohm load, with 1% or less Complete Harmonic Distortion in addition sounds (THD+N), and over a frequency vary of 20 Hz to 20 kHz, when relevant. Signal-to-Sounds ratio is measured in weighted absolute decibels (dBA) at a reference of 1 watt into 4 ohms. CTA-2006 lets buyers to evaluate car or truck amplifiers and receivers on an equivalent foundation. Using CTA-2006 conditions, the Kenwood XR401-4 is rated at 75 watts RMS x 4 with a 76 dBA signal to noise ratio.

Specific capacitors and inductors have been very carefully selected for the digital amplifier’s LC filter which is important for attaining highresolution audio.
Operating Voltage: 14.4V (11 – 16 V allowable)

Leave a Comment