Top 10 Best jl audio mono amplifier

Top 10 Rated jl audio mono amplifier in 2021 Comparison Table

Bestseller No. 2
JL Audio RD1500/1 RD-Series 1500W Class-D Monoblock Subwoofer Amplifier
  • 1500W Class-D Monoblock Subwoofer Amplifier
  • RMS @ 14.4 V: 750 watts x 1 @ 4 Ohm | 1000 watts x 1 @ 3 Ohm | 1500 watts x 1 @ 2 Ohm | 1500 watts x 1 @ 1 Ohm
  • RMS @ 12.5 V: 750 watts x 1 @ 4 Ohm | 1000 watts x 1 @ 3 Ohm | 1200 watts x 1 @ 2 Ohm | 1500 watts x 1 @ 1 Ohm
  • Frequency Response: 7 Hz - 500 Hz
  • Dimensions: 2.13" H x 18.05" W x 6.96" D
SaleBestseller No. 3
JL Audio XD600/1v2 Mono subwoofer Amplifier - 600 watts RMS x 1 at 2 ohms
  • RMS Power Rating @14.4V: 4 ohms: 400 watts x 1 chan. | 3 ohms: 500 watts x 1 chan. | 2 ohms: 600 watts x 1 chan
  • RMS Power Rating @12.5V: 4 ohms: 300 watts x 1 chan. | 3 ohms: 400 watts x 1 chan. | 2 ohms: 500 watts x 1 chan.
  • NexD High Speed Switching Class D Technology | Wired HD-RLC remote level control available, sold separately | LED power (green), over-current (yellow) and protect (red) indicators
  • Selectable Low-Pass Filter Slope: 12 dB or 24 dB | Variable low-pass filter: 50 - 500 Hz, 12 or 24 dB/octave | Fuse Rating: 30A x 1 inline (not supplied)
  • Dimensions: 7.09"W x 8.52"L x 2.05"H
Bestseller No. 4
JL Audio JD1000/1 Monoblock Class-D Subwoofer Amplifier, 1000 W
  • Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
  • Damping Factor @ 4 Ξ©: >1000 / 50 Hz
  • Damping Factor @ 2 Ξ©: >500 / 50 Hz
  • Min.Copper Power / Ground Wire Gauge: 4 AWG wire
  • S/N Ratio, referred to 1 W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Bestseller No. 5
JL Audio RD1000/1 NexD Monoblock Class D Car Audio Amplifier
  • JL Audio RD-Series RD1000/1 | Class-D Monoblock Amplifier | RMS Power Rating: 4 ohms: 500 watts x 1 chan. | 2 ohms: 1000 watts x 1 chan. Total power output: 2000 watts | CEA-2006 Compliant Amplifier
  • Differential-Balanced Inputs | Speaker-level (high-level) inputs: JL Audio XD-CLRAIC2-SW Required, sold separately | NexD Technology delivers outstanding sound quality, efficiency and reliability | LED clipping indicators | Pulse Width Modulated MOSFET power supply
  • LED power (green) and protect (red) indicators | Soft start turn-on | Mono channel operation | Preamp RCA outputs to daisy chain multiple amps | 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers | Heavy duty aluminum alloy heat-sink for extreme heat dissipation | Total Harmonic Distortion (THD): <1% | Variable low-pass filter: 50 - 500 Hz, 12 dB/octave | Low-Pass Slope (dB/octave): 12 dB/octave
  • Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz | Fuse Rating: 80 A x 1 | Dimensions: 7"W x 14-11/16"L x 2-3/16"H
Bestseller No. 6
Rockford Fosgate Punch P1000X1BD 1000 Watt Class-bd Mono Amplifier
  • The Punch P1000X1bd is a full chassis (2.38” x 7.76” x 13.28”) mono amplifier optimized for subwoofers only, that pumps out a whopping 1,000 Watts into a 1-Ohm load
  • Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 300 Watts x 1 @ 4-Ohm OR 500 Watts x 1 @ 2-Ohm OR 1000 Watts x 1 @ 1-Ohm)
  • RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
  • Featuring RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
  • Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
Bestseller No. 7
CT Sounds CT-1000.1D Compact Class D Car Audio Monoblock Amplifier, 1000 Watts RMS
  • Car audio amplifier with 1000 watts RMS power at 1-ohm load (14.4v); 650 watts RMS at 2-ohm load (14.4v); 350 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1000 watt amplifier absolutely pounds
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection; sleep easy at night knowing your class d amplifier car audio is protected
Bestseller No. 9
JL Audio XD400/4v2 4-channel car amplifier β€” 75 watts RMS x 4
  • 4-channel car amplifier
  • 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
  • 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable bridged)
  • Class D amplifier design with NextD switching amp technology
  • 8-9/16"W x 2-1/16"H x 7-1/8"D
Bestseller No. 10
JL Audio XD700/5v2 5-Channel car Amplifier - 75 watts RMS x 4 at 4 ohms + 300 watts RMS x 1 at 2 ohms
  • 5-channel car amplifer
  • 75 watts RMS x 4 + 180 watts RMS x 1 (at 4 ohms)
  • 100 watts RMS x 4 + 300 watts RMS x 1 (at 2 ohms)
  • 200 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
  • 10-1/4"W x 2-1/16"H x 7-1/8"D

Are you looking for top 10 great jl audio mono amplifier for your budget in 2021? Our team had scanned more than 23,192 customer satisfaction about top 10 best jl audio mono amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: XD600/1 – JL Audio 600 Watt Class D Monoblock Subwoofer Amplifier


Our rating:4.4 out of 5 stars (4.4 / 5)






RMS Energy Ranking (14.4V):
4 ohms: 400 watts x 1 chan.
2 ohms: 600 watts x 1 chan.
RMS Electricity Score (12.5V):
4 ohms: 300 watts x 1 chan.
2 ohms: 500 watts x 1 chan.
Unregulated MOSFET switching style power provide
NexD Extremely-Large Speed Course D topology
Wired JL Audio Hd-RLC remote degree command bought individually
LED electrical power (environmentally friendly) and safeguard (crimson/yellow) indicators
Point out-of-the-art microelectronic components
Mono channel operation
Advanced Thermal Rollback Program absolutely eliminates annoying thermal shut-down functions
Studio-quality signal processing with absolutely variable crossover filters
Extruded aluminum alloy procedure environment protection go over
Whole amplifier efficiencies exceeding 80%
Sounds-killing, extremely versatile differential-well balanced inputs
Preamp RCA outputs to daisy chain several amps
Defeatable low-go and infrasonic crossover filters
Dual speaker terminals simplify speaker installation
3-Way Program Defense circuitry (thermal, overload, and speaker limited defense)
Large duty compact unitary solid alloy warmth sink for extreme heat dissipation
Silver-plated RCA amount inputs
Silver-plated screw terminals
Enter sensitivity:
Stage: 100mV-4V
Variable small-go filter (50-500 Hz, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley)
Infrasonic Filter (30 Hz, 24dB/octave Butterworth)
Damping issue: >1,000 @ 4 ohms / 50Hz, >500 @ 2 ohms / 50Hz
Frequency reaction: 7-500 Hz
Dimensions: 8-1/2″L x 7-1/16″W x 2-1/16″H

RMS Power @ 4 ohms 400 watts x 1 channel
RMS Electrical power @ 2 ohms 600 watts x 1 channel
RMS Electric power @ 1 ohm Not Steady

Total RMS Electricity Output 600 watts
Most Enter Gauge Dimension 4 AWG
Bare minimum Impedance Unbridged 2 ohms
THD at Rated RMS Electricity 1.%
Preamp Outputs 1 pair
Created-in Crossover Reduced-pass (LP)
Very low-Go Crossover Frequency 50 – 500 Hz
Subsonic Filter 30 Hz
Sign-to-Sounds Ratio 87 dB
Channel Separation 67 dB
JL Audio Hd-RLC
Fuse Rating 50A x 1

Differential-balanced with RCA jack inputs
Point out-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley with continually variable cutoff frequency variety from 50 – 500 Hz (defeatable).
Buffered go-via variety
24 dB/octave Butterworth @ 30 Hz, defeatable

Leave a Comment