Top 10 Best headphone stand mount in 2021 Comparison Table
- 【Strong】Hook can withstand up to 10 pounds. (The heaviest headphone weigh only about one pound.)
- 【Material】Plastic material and soft silicone pad,Adhesive using 3M VHB tape
- 【Quantity】One headphone hanger VR holder with 3M VHB tape
- 【Durable】Using for home and office,mounting on computers,desk and wall.
- 🔷UNIVERSAL UNDER DESK DESIGN clamps on to desks up to 37mm thick and as narrow as 7mm for a near universal fit on most desks || Spring Clamp is easy to remove and reattach!
- 🔷ROTATING ADJUSTABLE HEADPHONE ARM swings underneath your desk for discreet & non-intrusive storage and swings back out for easy access.
- 🔷BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs.
- 🔷SOFT RUBBER PADS located on both clamp ends protect your desk or table from damage || Protects glass, woden & metal desks/tables from damage!
- 🔷 Under Desk Mount for Convenient Storage. Springed C Clamp, Easy Installation.
- Under Desk Headphone Hanger - Clamps on to desks up to 50mm thick and as narrow as 5mm for a near universal fit on most desks.
- Save Space Foldable Headphone Holder - Foldable arm design max save space well, It can be lain flat on the wall when it is not in using, folding or expanding at your convenience.
- Easy to Remove & Reattach - Screw clamp is easy to remove and reattach! No glue, no mess, soft rubber pads located on both clamp ends protects your desk or table from damage
- Multi-Purpose Headset Holder - Easy to install on desks, cabinets, glass surfaces, monitors, desktop towers, shelfs etc. Perfect for all kinds of headphones and also great for hanging game controllers, cables and other gadgets. Used two racks as soundbar holders since the TV stand doesnt have room for the soundbar. The sound bar width less than 2.1 inch, weight 5 lbs and two racks support it perfectly well!
- Durable & Stylish: Made from high quality aluminum, durable and strong, can holding pc gaming headsets without bending or breaking, making it a strong headphone Hook.
- 【The Home for Your Headphone】IFYOO RGB Headset Stand helps your create a clean and sleek desk setup. Store and Organize your headphone, Make sure it is always within reach. Elevate your headphone and protect it from daily scratching.
- 【Choose Your Gaming Color】Features 3 Dynamic RGB Lighting Modes: Flowing Rainbow, Colorful Breathing, Up to 4 Static colors. With fine tuned brightness and flowing speed, perfect for gaming or productivity. Good Vibe, Good Game.
- 【Convenient USB Hub】The headset stand comes with 2 x USB 2.0 Ports with data transmission & power supply supported. Plug and Play, Offers Easy access your USB Devices, like Mouse, Phone, Gamepad, Microphone… No driver needed.
- 【Versatile and Study 】Compatible with headsets with headband, like gaming headphones or productivity headphone. The headphone stand is Built for durability, with anti slip rubberized mat, and weighted base.Make sure your headset always stand there.
- 【Show Your Headset】Sleek and Minimal design, Provides the best way to show your headphones and enrich your desk setup【Worry-free Sales Service】: 1 year Warranty. Please feel free to contact us at any time.
- 【1Pack Headphone Hanger Stand】Small design saves more space. It can be used in homes and offices to free your desktop（Patent product）
- 【Lightweight & Sturdy】 Mount with Strong adhesive or Screws allow the headphone stand to achieve a maximum withstand 10 pounds.
- 【High-quality Materials】Made of good quality plastic with reasonable sizes and weight.the headset holder will stand stably on your desk.
- 【Universal Headset Holder】Suitable for all kinds of headphones, such as wired headphones, wireless headphones, PC gaming Headphones, TV headphones and so on.
- 【Easy to Install】It can be mounted any panel! such as on table, desk, and wall. (Tips: Clean surface well by using wipes before attaching)
- headphone hanger & stand 2-in-1 innovative design allows you to use the hs906 as a headphone hanger or a stand. use it as a hanger to tuck your headphones away neatly under your desk. or flip it over and use it as a stand to keep your headphones easily accessible.
- height adjustable with anti-slip design height adjustable from 6.5” to 10.2” for different usage scenarios. shorten for hanging under the desk and lengthen when using as a stand. raised ledge around mount prevents headphones from accidentally being knocked off stand.
- 360 degree rotating support rotating mount allows you to keep your headphones under the desk and out of the way. conveniently swivel them around to the front for easy access.
- user-friendly design clamp on to any table edge or horizontal shelf - simple, tool-free installation. clamp adjusts to fit tabletops up to 1.97”/50mm thick. soft silicone pads on clamps protect your desk or furniture from damage.
- wide compatibility works with most over ear, on ear and gaming headphones headset. can also be used to store other items within 5kg such as cables, wires, bags etc.
- Holds all headphones with ease, even the largest/heaviest gaming & audiophile sets.
- Mounts in seconds with ultra-strong custom 3M VHB adhesive (same that GoPro uses) with a surface area twice the size of the original for an incredible hold.
- Built-in cord management. The velcro StowStrap secures your cords taut under your desk, out of the way of your legs.
- Premium glass reinforced composite body (twice the strength of cast aluminum) with a matte textured finish that has the perfect amount of friction.
- Optional screw mounting hardware included. And an extra 3M adhesive pad too.
- Keeps your headphones out of sight & easy to reach.
- Holds ultra-securely (same 3M adhesive uses).
- Thick premium silicone construction + steel pin inner reinforcement (new)
- Lessens cord clutter
- Can hold two sets of headphones.
- 【Sturdy Headphone Hanger】Using 3 M double-sided adhesive, Havit headset Hook can hold ultra-securely , and can be installed almost anywhere as needed. The hook can firmly hang all headphones and backpacks weighing less than 2.87 pounds.
- 【Space saving】 Install virtually anywhere - on walls, cabinets, glass surfaces, monitors, desktop towers, game consoles, etc. You don’t have to worry about headphones taking up space, the desk is tidy and comfortable.
- 【Easy to use】 No tool,No glue, no punching, just install the parts within 10 seconds, you will have a perfect headset hook for gaming.
- 【General Compatibility】Fits for Beats, Sony, Sennheiser, Bose, Philips, JVC, AKG, GRADO, SHURE, beyerdynamic and all other gaming headphones.
- 【User Tips】 (1).Stick the slide roil(with the 3 M adhesive side) to the wall (2) Align the base with slide rail card slot and drag (3).Insert the short bracket into the base card slot.
- Made from high quality metal, durable and strong, capable of holding light weight to very heavy headphones without bending or breaking, making it a strong headphone stand.
- No glue, no mess, adjustable design allowing to fit on to desks and tables of different tickness.
- Rotable design allowing to be used on horizontal or vertical surfaces (hex/allen key tool needed, not included in package).
- Unique and stylish, will look good in any setting be it at home, work, school or cyber café.
- Smaller than a headphone stand, sturdier than most other comparable desk headphone hangers.
Are you Googling for top 10 great headphone stand mount for the money in 2021? Our AI system had scanned more than 93,114 customer satisfaction about top 10 best headphone stand mount in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:
Our Best Choice: Headphone Mount, 6amLifestyle Headset Holder Hanger, Aluminum Under Desk Dual Headsets Stand, Stick-On Hooks Universal for All Headphones, Silver (Patented)
Our up-to-date edition which arrives further 2 holes and screws has been released！
6amLifestyle Headphone Stand is a stickup headphone hanger precisely designed to cling not 1, but two headphones.
Stylish and tasteful physical appearance, made up with Aluminum,complete strong and tough.
Light-weight and sturdy
We have our own workforce, homegrown, excellent far more protected, irrespective of whether product or workmanship are initially class. And it only 1.3 ounce,you can carry it just about everywhere.
Simple to install
You can set up it to the clean up bottom surface of your desk or the aspect encounter of your desk.
Help you save Operate Area
Will help you to area your charming earphones conveniently and permit you to accessibility them effortlessly.
You can also use it to hang some other tiny items.
➤ Maximum load: 500g
➤ Proportions: 3.6 x 1.5 x .97 inches
➤ Device Pounds: 1.37 ounces
➤ Shade: Grey/Silver
Within Package deal:
✓ 1 x aluminum headphone holder with gap
✓ 1 x VHB tape for alternative
✓ 2 x screws
1.The adhesive tape can not contact oil, dust, soil or other particulate subject,and you should retain it absent from any heat resource,otherwise it may eliminate stickiness.
2.Clean and dry the floor of the desk and the stand right before setting up.
3.We advise you wait 24 hrs to make the adhesive totally safe so that there is adequate adhesive force in between the desk and the headphone stand.
We are so self-assured in ourproducts that we give a life time manufacturer’s guarantee for defects
Click on the Insert to Cart Button at the Leading of this Web page Now to Delight in !
6amLifestyle, We specialize in Fashion, Magnificence, Residence and Lifestyle and delight ourselves on our potential to work with just about every shopper centered on their unique wants. We give the most effective mainly because our customers are the greatest.
✅ 1 Hanger Holds 2 Headphones: The 6amLifestyle dual headphone holder is sturdy and long existence. Size: .98inch Wide and 3.54inch Extensive. Hold two headsets at the same time, and hold your desk tidy and cleanse. Ideal for home, business office and dorm
✅ Universal Underneath Desk Hook: Lightweight but superb weight load perfomance.This headphone hanger suits for Beats, Sony, Sennheiser, COWIN, Bose, Philips, AKG and other headphones. The holder also could be utilised to maintain other issues this sort of as cords, purse, or shopping bag, and so forth. By Adhesive: Max load ≤2 kilos. By Screws: Max load ≤ 8 pounds (for the heavier hanging need)
✅ Two Approaches To Set up- 3M Adhesive & Screws: The set up of the Headset holder is uncomplicated and no injury to desk area. Just install it inside of seconds by strong 3M VHB two-sided tape or mount with screws if need to have more firmness
✅ Curved Edge And Light-weight Bodyweight: Headphone mount is designed of premium aluminum, the curved edge can safeguard your favourite headphones from scratching. Ideal for glass, wooden or steel desk, desk, shelf, cupboard
✅ Away From Clutter And Straightforward To Access Headphones: This little headphone hook aids you arrange the constrained desk space and build a neat setting