Top 10 Best gripstick headphone extraction tool

Top 10 Rated gripstick headphone extraction tool in 2021 Comparison Table

Bestseller No. 1
GripStick Headphone Plug Extraction Tool
  • NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool.
  • FIX YOUR AUDIO: The cylindrical shape allows the tool to be inserted in between the jack housing and the broken piece, physically isolating the piece from any friction against the jack walls. At the same time the split in the cylinder allows for manufacturing differences and acts as a kind of cylindrical pliers to grip the broken piece. This tool is designed for repair professionals, and will pay for itself with the repair of a single device. With careful use it can survive to repair many device
  • HOW TO USE IT: Shake off any loose pieces from the broken headphone plug that may fall off the jack. Push the GripStick into the device by hand. If it does not work, try to lightly/slowly tap it in. It should go in about the same length of a headphone plug. Don't push it in too far as it could bend the tip. If your plug broke in such a way it left the cylindrical metal shell inside the jack, the GripStick must not get caught on the inside of the cylinder shell, as it will never work if it does.
  • KEEP IN MIND: When pulling the GripStick out, try pinching the GripStick with your fingers as you pull. This will help grip the broken piece and pull it out. Pinch the GripStick closest to the device as possible. If this does not work, you may need to use a pair of pliers (preferably needlenose) and grip and pinch, again closest to the device as possible, as you slowly pull out. In some devices you may have to pinch with significant pressure.
  • NOTE: If the GripStick bends that should be fine as long as you make sure it is in all the way. Depending on how the headphone plug was broken off in the device, it may not be possible to be removed without disassembling the device and therefore the GripStick would not work in that situation. Also, please note that the jack connectors inside your device may have been damaged when the plug was initially broken off and even if the broken piece is taken out, the headphone jack may still be damaged.
Bestseller No. 2
Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tubes of Different Thickness, Jack Remover
  • PRODUCT COMPOSITION: This headphone extraction tool kit includes one short and one long laser cutting mini stainless steel pipe. These two stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack.
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved.
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above.
  • GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit, please take a picture and contact us. You will get a FULL REFUND without return..
  • COMES WITH SMALL GIFT: The 3 in 1 mini screwdriver in the package is a gift for your support on my small business. It includes 1.7mm Flat head mini screwdriver, 1.7mm Phillips mini screwdriver and 2.5 mm bolt remover. It is portable and can be used to disassemble glasses and watches and some other electronic products. Hope you like it!
Bestseller No. 3
GripperX Headphone Plug Extraction Tool with Key Ring and Cleaning Brush - Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
  • NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool.
  • PURPOSE: GripperX is designed for the purpose of extracting a headphone plug that has broken apart, leaving the tip of the plug lodged inside the headphone jack of a mobile device.
  • HEADPHONE JACKS: Designed to be used on 3.5mm jacks found on phones, laptops and smaller devices.
  • HOW TO USE: Insert GripperX between headphone jack housing and broken plug. You may need to lightly tap it in. It should go in about the same length of the headphone plug. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove. Restore functionality to your device's headphone jack.
  • USE WITH CAUTION: Rotating or inserting too far may damage the device. The opening is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.
Bestseller No. 4
Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover - 4PC
  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack.
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved.
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Rotate the tool when you can't press it in.
  • HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover.
  • GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit, please take a picture and contact us for a FULL REFUND.
Bestseller No. 5
Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
  • 🛠️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks.
  • 🛠️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
  • 🛠️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough.
  • 🛠️Tep: This set of headphone jack remover tool is considered a single-use tool.
  • 🛠️If you have any question, please feel free to contact us by email.
SaleBestseller No. 6
Juyeer Upgraded Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover-4 Pack Custom Stainless Metal Tube
  • 😊PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
  • 😊HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
  • 😊GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return.
  • 😊USE WITH CAUTION: Inserting too far may damage the device. The pointed end of the tube is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.
Bestseller No. 7
Metal Tube Headphone Plug Extraction Tool- Headphone Tip Removal Tool,Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
  • Applicable To :all models of mobile phones, pads and computers headphone jack, is built to easily remove broken 3.5mm headphone plugs from jacks.
  • Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
  • Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough.
  • Tep: This set of headphone jack remover tool is considered a single-use tool.
  • If you have any question, please feel free to contact us by email. You don't need to return the product, we can give you a full refund.
Bestseller No. 8
Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover-4 Pack Custom Stainless Metal Tube
  • ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
  • ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
  • ✔️GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return.
  • ✔️USE WITH CAUTION: Inserting too far may damage the device. The pointed end of the tube is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.
  • ✔️GIFT: The headphone jack cleaning brush in the package is a gift.
Bestseller No. 9
JUYEER Headphone Plug Extraction Tool - Customized Metal Tube Grip Stick Puller, Headphone Tip Removal Tool with Headphone Hole Cleaning Brush
  • ✔️If this doesn't solve your problem, please feel free to contact us by email. You don't need to return the product, we can give you a full refund.
  • ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
  • ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
  • ✔️GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return.
  • ✔️Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough because the headphone hole is 0.55 inch deep. Then squeeze the end of the metal tube and pull it out.
SaleBestseller No. 10
Jonard R-5926 Pin Extractor, 16-20 Contact Size, 3" Length
  • VERSATILE USE: Compatible with nearly all AMP CPC pin connectors between contact sizes 16-20
  • Smooth built-in plunger makes removal of pins quick and easy
  • COMPACT SIZE: Only 3" in length for convenient storage
  • Item Package Dimension: 18.0" L x 18.0" W x 21.0" H

Are you finding for top 10 great gripstick headphone extraction tool in the market in 2021? We had scanned more than 17,281 customer satisfaction about top 10 best gripstick headphone extraction tool in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: iFixit Jimmy – The Electronics Opening Tool


Our rating:4.3 out of 5 stars (4.3 / 5)





From the brand

ifixit part repair

ifixit part repair

iFixit Logo Brand Story

iFixit Logo Brand Story

You can fix it. We can show you how.

Our story

How we got our start?
In 2003, our CEO broke his laptop and couldn’t find a repair manual to fix it, so he and his college roommate decided to post their own instructions online. Now, iFixit helps over 10 million people a month repair things from laptops and game consoles to skateboards and vacuums.

What makes our product unique?
We’ll help you finish your repair from beginning to end—we offer over 60,000 repair guides free of cost. All of our parts are quality-tested, and if anything happens to your tools, we’ll replace them for as long as you own them.

Why we love what we do?
Repair saves money, protects the environment, and empowers people to connect with their things and believe in themselves.

HIGH QUALITY: Thin flexible steel blade easily slips between the tightest gaps.
ERGONOMIC: Flexible handle allows for precise control.
UNIVERSAL: Tackles all prying tasks, from opening electronic devices to unsticking painted on outlet covers.
PRACTICLE: Popular uses include applications in Electronics, Paint, Construction, Home Improvement, DIY, and more!
Covered by iFixit’s Lifetime Warranty.

Leave a Comment