Top 10 Rated fiio e6 portable headphone amplifier in 2021 Comparison Table
- Suitable for headphones ranging from 16 to 150 Ohms. Gain switch for matching output to headphone power needs.
- Superior sound quality through expertly selected components and design, utilizing OPA1642 preamp and AD8397 amp section.
- Fully discrete bass boost circuit increases output by 3.5dB at 60Hz, with bypass when off.
- Handsome all aluminum body and chassis is sturdy and shielding against EM interference.
- 1400mAh internal battery powers for up to 16 hours of use.
- Standard mini USB interface: Connect to your PC for digital audio transfer and/or charge of the 1500 mAh internal battery
- 3.5 mm stereo headphone output: Suitable for 16-150 ohm headphones; MAX output current > 80 mA; THD <0.003%@1KHz
- 3.5mm SPDIF input (optical, coaxial) digital connector to receive PCM signals up to 24-bit/192kHz
- 3.5mm Analog Line-In for use with other audio sources, 18-Pin multi-functional interface to connect FiiO's L7 and E9 docks
- Digital Bass, Treble, Gain, Volume Controls
- 【Mini HiFi Headphone Amplifier】It is Delicate, Compact, Lightweight, and Portable that it can be Carry Conveniently
- 【3.5mm AUX Input and Output】3.5mm AUX Input and Output, SNR>120Db and THD+N 0.0003%, Make it Possibility to Output not just Louder Sound, but a Sharper and More Real Stereo Sound without Distortion
- 【Aluminum Matte Surface】Fashion Design Provides You a Comfortable Handheld Feeling While the Aluminum Matte Surface Makes it Durable
- 【Rechargeable Lithium Battery】It Adopts a Rechargeable Lithium Battery with 1500mAH Capacity, Which Allows it to Stay Working More than 8 Hours
- 【Wide Compacity】It can Remarkably Compatible with a Various of Digital Devices, Such as MP3 MP4 Mobile Phone Computer (Tips: It is not recommended to use while charging, because current disturbance will occur when charging, Which may lead to noise)
- Mini HiFi headphone amplifier,which make it convenient to carry, can output remarkable sound without distortion.
- Amp Using Time: More Than 5 Hours, Load Impedance: 16-300Ω.
- Two-stage gain switch enhances the signal input into the amp circuit for optimal performance of the headphones.
- 3.5mm AUX input and output and SNR>120dB and Distortion 0.004% make it possibility to output not just louder sound, but a sharper.
- Compatibility MP3, MP4, Phones, laptop Computer and 3.5mm Audio a Various of Digital Devices.
- LOW NOISE FLOOR — The unit has an optimized low-pass filter and selectable bass boost circuit that are designed for a low noise floor in all states.
- DAC Chip—The Internal DAC chip is a PCM102 and can handle PCM files up to 24-bit/96 kHz while improving audio quality via a linear filter, reduced delay and internal silence on changing tracks, and no phase shifts.
- USB CONNECTION — Connects to your laptop via its micro USB connection, which also provides it with power.
- PORTABLE DESIGN — A sleek, brushed aluminum shell and chassis allow for durable, portable use.
- [Unbelievably low noise floor] Optimized active low-pass and BASS circuit designs ensure lower noise floor in any situation, so your music is truly played back faithfully. The USB Type-C connector gives the device more compatibility. At the same time, the headphone/line/coaxial (up to 24 bit/192kHz) outputs make it easier to connect to other equipment.
- CSR8675 Bluetooth 5.0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
- For greater power independent Dual AK4377A DAC and detail resolution,the BTR3K features both balanced 2.5mm and single-ended 3.5mm outpts.
- Can be remotely controlled via FiiO Music app to switch channel balance,8 different DAC lowpass filter and 10-band EQ
- New Type-C connector with USB DAC functionality+11 hour of continuous pleasure at a full charge
- Bluetooth indicator light +Call up Siri in iOS+In-line Control(in headphones with CTIA controls, you can use the microphone as well as the play/pause, volume, and track selection controls)
- Compact design
- Durable anodised aluminum Chassis
- Self powered amplifier
- Can be charged during use
- Utilizing AKM’s new efficient AK4462 VELVET SOUND DAC and XMOS XUF208 USB chip allowing it to easily support decoding up to 768kHz/32bit PCM and DSD512, the Q3 achieves excellent performance.
- With THX’s patented feed-forward error correction topology, the AAA amps have low distortion, high power and a pure, uncolored sound. You’ll experience subtle details and shocking swings in your music effortlessly with the AAA amp in the Q3.
- Multiple interfaces headphone jacks. The Q3 is equipped with 4.4mm/2.5mm balanced and 3.5mm single-ended outputs, allowing you to connect all kinds of headphones.Headphone output specifications (3.5mm headphone output port):150mW (16Ω, THD+N＜1%, USB IN);160mW (32Ω, THD+N＜1%, USB IN);19mW (300Ω, THD+N＜1%, USB IN).Balanced headphone output specifications (2.5mm/4.4mm headphone output port):180mW (16Ω, THD+N＜1%, USB IN);300mW (32Ω, THD+N＜1%, USB IN);35mW (300Ω, THD+N＜1%, USB IN)
- USB Type-C input interface.USB-IF USB C compatibility certified: meets standard transmission interface specifications to ensure the compatibility of its USB solution
- Thesycon official USB Audio driver: compliant with USB Audio 1.0 & 2.0 device class specifications. The Q3 can operate as a USB DAC when paired over USB with a computer. It can decode audio formats up to 384 kHz / 32-bit (PCM). No driver is needed for use with a Mac computer, while Windows will require a driver easily available from FiiO's website.
- 【HiFi Headphone Amplifier 】-- It supports most headphones of high impedance 16-300Ω, 3.5mm AUX Input and Output, signal-to-noise ratio> 100Db, THD + N = 0.0003%, fully filter noise, enjoy high-quality audio
- 【Two-stage Gain Switch】-- This Headphone Amp enhances the signal input into the amp circuit for the optimal performance of the headphones. Make it Possibility to output not only louder sound but a sharper and more Real stereo sound without distortion
- 【Rechargable Lithium Battery】-- It adopts a rechargeable lithium battery with 2000mAH capacity, which allows the headphone amp to stay working more than 12-15h. Plus, there is a volume control knob for volume adjustment
- 【Portable and Lightweight 】-- This headphone amp is designed to enhance your music listening experience wherever life takes you; A sleek, sturdy shell and chassis allow for a durable use
- 【Broad Compatibility】-- This amplifier is remarkably compatible with a variety of digital devices, such as MP3, MP4, iPhone, iPod, iPad, Computer, CD players and personal media players,Xbox one,PS4,PS5 Controller etc.
- Volume potentiometer with barrier-free design for easy operation
- Switchable built-in 3dB bass boosting circuit; superior to software EQ effect
- USB digital audio convert to coaxial digital audio output
- Fixed volume full-scale line level output for maximum signal quality
- Automatic support by modern OS without drivers. Maximum audio format: 96Khz/24Bit | Now updated model with USB Type-C port
Are you searching for top 10 good fiio e6 portable headphone amplifier for your money in 2021? We had scanned more than 38,941 customer satisfaction about top 10 best fiio e6 portable headphone amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:
Our Best Choice: FiiO E17 Alpen Portable Headphone Amplifier USB DAC
E17 is variety of higher-quality and multi-functional amplifier for headphones. It has quite a few outstanding capabilities with modest form and becoming transportable. Superior overall performance layout of amplifier is to ensure the quality of audio. Multi-input ports style tends to make it effortless to work. It has a lot of ports these as Pc USB or S/PDIF digital solitary or AUX analog sign enter. With OLED display screen, the interface of E17 is so intuitive and key operation is relaxed.
Get the job done indicator – indicate energy on/off and charging position Higher-brightness of OLED dot matrix screen – exhibit varieties of working and environment details Built-in large capability chargeable Li-ion battery whose use time can access 15 hrs Fulfill listening wants by modifying Achieve, BASS, TREBLE or Equilibrium
3.5 mm stereo headphone output: Suited for 16-150 ohm headphones MAX output current > 80 mA THD <0.003%@1KHz
3.5mm SPDIF input (optical, coaxial) digital connector to receive PCM signals up to 24-bit/192kHz
3.5mm Analog Line-In for use with other audio sources, 18-Pin multi-functional interface to connect FiiO’s L7 and E9 docks
Digital Bass, Treble, Gain, Volume Controls