Top 10 Best feeler gauge for guitar

Top 10 Best feeler gauge for guitar in 2021 Comparison Table

SaleBestseller No. 1
Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool (0.04-0.88 mm, 32 Blades)
  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness; Foldable feeler gauges, easy and convenient to take and store
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification
  • Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that
Bestseller No. 2
MusicNomad Precision Truss Rod Neck Relief Gauge Tool (MN600)
  • Gauge Includes the 3 Most Common Truss Rod Relief Measurements (.006", .008", .010") for Electric, Acoustic, Classical & Bass Guitars.
  • Precision, Smooth Stainless Steel without the Annoying, Messy Oil Found on Traditional Feeler Gauge Sets
  • Laser Etched Sizes (in. & mm) & Instrument Type that Won't Rub Off
  • Easy to Follow Instructions Printed Right on the Handle & an Innovative Pick Capo to Assist
  • This Gauge is Part of our KEEP IT SIMPLE, SETUP (KISS) Method using our Precision Gauges & Tool Sets
Bestseller No. 3
TIMESETL 2Pack Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool 32 Blades + String Action Ruler Gauge Tool for Guitar Player & Luthier & Mechanic Auto Repair
  • 【High Quality】Stainless steel with rounded off edge, anti rust, prevent scratch or cutting, durable and long service life.Surface polished smooth, applying anti-rust oil to prevent rust.
  • 【Imperial and Metric】1Pcs foldable feeler gauge + 1pcs guitar string action ruler, both imperial and metric printed, packed in plastic holder, easy to use
  • 【Feeler Gauge】Balde legnth 8.8cm/width 1.3cm, thickness from 0.035"(0.88mm) to 0.0015"(0.04mm), light oil covered to prevent rust and stick, thumb screw is easy to use for blade removal and protection
  • 【Action Ruler】Size 8.9*5.1cm, etch printing on double sides, will not fade, accurate and clear to measure string height, pickup height, etc
  • 【Wide Application】 They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines gaps, everything in between and other hard to reach places.
Bestseller No. 4
32 Set Blades Stainless Steel Feeler Gauge with Action Ruler Dual ​Marked Imperial and Metric Gap Measuring Tool Teaching Feeler for Guitar Player & Luthier & Mechanic Auto Repair
  • [High Quality] Stainless steel with rounded off edge, anti rust, prevent scratch or cutting, durable and long service life.Light oil covered to prevent rust and stick, thumb screw is easy to use for blade removal and protection.
  • [Easily identifiable Feeler Gauge] Balde legnth 8.8cm/width 1.3cm, thickness from 0.035"(0.88mm) to 0.0015"(0.04mm), the numbers of size are etched into feeler gauge for easy identification.
  • [Imperial and Metric] 1Pcs foldable feeler gauge + 1pcs guitar string action ruler, both imperial and metric printed, packed in plastic holder, easy to use, Foldable feeler gauges, easy and convenient to take and store.
  • [Useful Action Ruler] Size 8.9*5.1cm, etch on double sides, will not fade, accurate and clear to measure string height, pickup height, etc.
  • [Wide Usage] Suitable for guitar player, luthier and mechanic to measure thickness of hard to reach place.
Bestseller No. 5
32 Piece Stainless Steel String Action Ruler Feeler Gauge Luthier Guitar Tool
  • 🎸Action Ruler, Fingerboard Protector, Fret Guard and 64 Piece Feeler Gauge Set.-QQ510637638
  • 🎸Each feeler gauge is marked with both metric and imperial measurements.
  • 🎸Designed for string instruments ,such as guitar, bass, mandolin banjo etc.
  • 🎸 It can measure the clearance of fret and fret board, the height of pickup and strings, nut slot depth, uneven fret board, etc.
Bestseller No. 6
Guitar Luthier Tools, FOVERN1 Luthier Measuring Tools Set Include Guitar Neck Notched Straight Edge Fret Rocker String Height Gauge Understring Radius Gauge Steel Feeler Gauge for Guitar and Bass
  • 【High Quality】These guitar gauge measuring tools are made of stainless steel with round edges, durable and not easy to rust, not easy to scratch both string or hands.
  • 【Wide Usage】Suitable for measure all kinds of electric guitar, electric bass, acoustic guitar, acoustic guitar, electric box guitar fretboard measured in radians, radians to adjust the strings piano code.
  • 【Understring radius gauge】 Come with 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch and 20 inch radius, can be applied to measure fret board radius, saddle radius, nut radius from either the top or the bottom radius surface.
  • 【Size and weight】The fret rocker is 3.9 x 2.0 x 0.8 inch and 1.75 oz in weight, the neck straight edge is 16.5 x 1.5 x 0.08 inch and 9.46 oz in weight, the steel feeler gauge dual marked metric and imperial gap measuring tool is from 0.0015 inch to 0.035 inch in thickness.
  • 【Package includes】 Guitar luthier tool set includes: 9 Understring Radius Gauge, 1 string height gauge, 1 imperial gap measuring tool, 1 guitar neck notched straight edge and 1 fret rocker, 13 pieces in total, easy to cater users' needs.
Bestseller No. 7
TIMESETL 13 Stainless Steel Guitar Bridge Saddle Nut Files + 32 Blades Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool + 9 Sheet Sandpaper for Guitar and Bass Setup
  • 【Package Content】Guitar Luthier Tool Set Include 13 pcs Stainless Steel Guitar Bridge Saddle Nut Files, 32 Blades Feeler Gauge and 9 Sheets Sandpaper.
  • 【13 Guitar File Set】Stainless steel bridge saddle nut files, 0.4/0.5/0.6/0.7/0.75/0.8/0.9/1.0/1.05/1.1/1.2/1.4/1.6/25mm grinding length and 30mm length of the hilt, perfect tools filing string slots into nut and bridge for adjust the string height.
  • 【32 Blades Feeler Gauge】32 hardened, tempered steel blades, measurement from 0.0015 inch (0.038 mm) to 0.035 inch (0.889 mm), it is a guitar common spacing chord distance measure tool, chrome plated main shaft for easy clean up and professional look.
  • 【Sandpaper】Come with 9 sheets(3 x 400 grit, 3 x 320 grit, 3 x 240 grit), for polish saddle, nut, string, Also can use it to polish fret board, fret wire and so on.
  • 【Application】Suitable for acoustic & electric guitar, bass, luthier, ukulele setup.
Bestseller No. 8
Holmer Guitar Luthier Tools with 15 Blades Feeler Gauge Metric, String Action Gauge Ruler, Fingerboard Fretboard Radius Gauge Measuring Tool, 2 Fingerboard Guard Protectors. (Chrome)
  • 15 Blades feeler gauge set is made of 65 manganese steel, great for gap spacing measurement from 0.002 inch (0.051mm) to 0.025 inch (0.635 mm) with dual marked metric and imperial - inches and millimeters, foldable is 3.7 inches / 9.5cm in length easy and convenient to take and store.
  • Fingerboard guard protect your guitar or bass fretboard frets from scratching or damaging while filing and polishing.
  • Durable stainless steel string action ruler with precision etched markings so prints will not easily wear off from continued use; accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height.
  • High quality guitar radius gauge fingerboard fretboard measuring tool and radius gauges in7.25'' 9.5'' 10'' 12'' 14'' 15'' 16'' 20'' rad.
  • Make the necessary measurements and adjustments on acoustic and electric guitar, bass, banjo, mandolin and other string instruments, accurate, convenient, pocket-sized measuring tool can be taken to everywhere you like.
Bestseller No. 9
Mr.Power Guitar Luthier Tools Include 9 Understring Radius Gauge Set + 32 Blades Feeler Gauge + Guitar Pin Puller
  • 【Understring Radius Guages】Stainless steel material,set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius,A must have for bass guitar maintain and adjustment.
  • 【32 Blades feeler gauge】32 hardened, tempered steel blades, measurement from 0.0015 inch (0.038 mm) to 0.035 inch (0.889 mm), it is a guitar common spacing chord distance measure tool, chrome plated main shaft for easy clean up and professional look. Can be applied to measure all kinds of electric guitar, electric bass, acoustic guitar, acoustic guitar, electric box guitar fretboard measured in radians, radians to adjust the strings piano code
  • 【Guitar bridge Pin Puller】This bridge pin puller can help you to remove bridge pins without making damage to your guitar.
Bestseller No. 10
XtremeAmazing Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool 32 Balde with String Action Ruler Gauge for Guitar Player, Luthier, Mechanic Auto Repair Stainless Steel
  • The measuring feeler gauge has 32 blades thickness; Foldable, easy and convenient to take and store
  • Easy identification: dual marked metric and imperial,light oil covered to prevent rust and stick
  • Used for electric guitar, bass and acoustic guitar
  • Suitable for guitar player, luthier and mechanic to measure thickness of hard to reach place
  • Package Contents: 1 x foldable feeler gauge, 1 x guitar string action ruler

Are you looking for top 10 great feeler gauge for guitar in the market in 2021? Our AI system had scanned more than 73,697 customer satisfaction about top 10 best feeler gauge for guitar in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: CAMWAY 32PCS Blades Steel Feeler Gauge 0.0015-0.035 inch/ 0.04-0.88mm Dual Marked Metric and Imperial Gap Measuring Tool


Our rating:4.3 out of 5 stars (4.3 / 5)





Product Description

Feeler Gauge Feeler Gauge

Specifications:

Measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm

Material: 65 manganese steel

Blades: 32 pieces

Package includes:

1 x Feeler gauge

Feeler Gauge Feeler Gauge

Metric sizes (mm):

0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.

Inch sizes:

0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035

Feeler gauge  Feeler gauge

Feeler gauge  Feeler gauge

Feeler gauge  Feeler gauge

32 Blades Steel Feeler Gauge

Steel Feeler Gauge Dual Marked Blades: 32 piecesMeasuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm

Can be Bent

Feeler gauge composed of a group of thin steel sheets with different thickness steps

Perfect Measuring Tool

Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps and other hard to reach places.

Feeler gaugeFeeler gauge

Feeler gaugeFeeler gauge

Feeler gaugeFeeler gauge

65 Manganese Steel

Metric and Imperial Gap Measuring Tool Material: 65 manganese steel

Precise Calibration

Precise calibration (mm & inch)for each Blade to easy read

Durable for Use

Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion.

Is Discontinued By Manufacturer‏:‎No
Package Dimensions‏:‎4.02 x 3.86 x 0.71 inches; 4.94 Ounces
Date First Available‏:‎June 27, 2018
Manufacturer‏:‎CAMWAY
ASIN‏:‎B07F2X8L4J

【Durable for Use】Constructed from hardened tempered steel with a lube oil coating to prevent pitting and corrosion.
【Wide Application】Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps and other hard to reach places.
【Metric Sizes (mm)】0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
【Inch Sizes】0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
【Measuring Range】0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm

Leave a Comment