Top 10 Best crown power amplifier

Top 10 Rated crown power amplifier in 2021 Comparison Table

Bestseller No. 1
Crown XLi800 Two-channel, 300-Watt at 4Ω Power Amplifier
  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0. 775V and 1. 4V
  • Electronically balanced RCA & XLR inputs; binding post and Speak on outputs
  • Efficient forced-air cooling prevents excessive thermal buildup
Bestseller No. 2
Crown XLS1002 Two-channel, 350-Watt at 4Ω Power Amplifier
  • Class D amp with Crown ultra-efficient drive Core technology weighs less than 11 lb. (5 kg)
  • Higher DSP capabilities: more control; has band pass filter per channel
  • Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
  • Selectable input sensitivity; 1.4VRMS and .775VRMS options so that amp can be driven At full power
  • Set sleep mode after specified time without having to press a button
Bestseller No. 3
Crown Audio XLi 1500 Stereo Power Amplifier with Touch Fastener Straps (10-Pack) & (2) XLR Cable Bundle
  • 450W Per Channel at 4 Ohms
  • 330W Per Channel at 8 Ohms
  • 900W at 8 Ohms Bridged Mono
  • Stereo/Parallel/Bridge-Mono Mode
  • User Selectable Input Sensitivity
Bestseller No. 4
Crown XTi2002 Two-channel, 800-Watt at 4Ω Power Amplifier
  • Peak x Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls – normal, early and full speed – for matching fan performance to a specific application
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Input: XLR (x2); Output: XLR (x2), Speakon (x2), Binding Post (x2 pair)
Bestseller No. 5
Crown CDi 1000 Two-Channel, 500-Watt @ 4Ω, 70V/140V Power Amplifier
  • Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs
  • Switch-mode universal power supply
  • Intuitive front-panel LCD screen for quick, easy configuration
  • Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
  • Up to 20 user defined DSP presets are available
Bestseller No. 6
Crown DSi 1000 Amplifier 2 Channel for JBL Cinema Speakers Systems
  • Presets for popular JBL cinema speaker systems
  • Front-panel LCD guides you through the setup process
  • Onboard digital signal processing
  • USB connectivity
  • Switch-mode universal power supply
Bestseller No. 7
Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp
  • Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
  • Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz – 30 Khz, THD + Noise @ 1Khz full power: <0. 04%, Input Impedance: 10K Ohm Balanced, Input signal voltage: 660mV – 1. 5V.
  • Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): >400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: > 100dB, IMD 60Hz & 1kHz, 4: 1: <0. 04%, SLEW RATE (input filter limited) : 40v/uS, Power Requirements: 120V / 50-60Hz, Weight: 40. 8 lbs, Dimensions: 19. 09 x 16. 93 x 3. 35 inch.
  • Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max.
Bestseller No. 8
QSC RMX1450a Stereo Power Amplifier
  • Requires 2 rackspaces
  • 1/4" TRS, XLR, and barrier strip balanced inputs
  • Binding post and Neutrik Speakon outputs
  • Front-mounted gain controls for easy access
  • Independent and defeatable clip limiters
Bestseller No. 9
QSC A-B Box, MultiColored (GX7)
  • 2 x balanced XLR and 1/4-inch TRS (one on each channel)
  • RCA phono connectors
  • Speak on combo XLR/TRS connectors (on each channel)
Bestseller No. 10
Peavey IPR2 3000 Lightweight Power Amp
  • 2- Channel independent fourth-order Linkwitz-Riley crossovers
  • DDT
  • Revolutionary IPR class D topology
  • Combi XLR 1/4 inputs
  • Speakon output connectors

Are you looking for top 10 good crown power amplifier for the money in 2021? Our AI system had scanned more than 51,528 customer satisfaction about top 10 best crown power amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: ART SLA1 Studio Linear 100W Compact Power Amplifier


Our rating:4.5 out of 5 stars (4.5 / 5)



Leave a Comment