Top 10 Best crossover amplifier

Top 10 Best crossover amplifier in 2021 Comparison Table

Bestseller No. 1
Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater
  • To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems
  • Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 – 200 Hz +/- 3dB
  • Output Impedance: 4-8 ohm. CL3 Rated in wall certified raw speaker wire to connect your amp to the speaker
  • Sub volume and crossover control knobs
  • LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs.
SaleBestseller No. 2
Rockville PPA20 Preamp Professional 1U Rack Mount Pre-Amplifier w/Crossover+EQ, Black
  • Rockville PPA20 Rack Mount Pre-Amplifier. 1U Rack Size. 1/4" microphone input. RCA PHONO / AUX1 / AUX2 / AUX3 / AUX4 / AUX5 inputs. 1/4" headphone output. RCA REC / LINE outputs. XLR master output ( left, right ). Headphone volume & Microphone volume controls. 3 band EQ (Treble / Mid / Bass). Master volume. L / R balance. Input source switch. Mono / Stereo switch. Mute
  • Low Cut Switch allows you to cut off certain frequencies which comes in handy when using turntables, subs, and other gear. This function will allow you to play your music louder, with lower distortion and make your speakers last longer. Treble / Bass control. Loudness compensation circuit which at low-to-medium volume boosts the bass and treble response. Tape Monitor . Ground lift switch
  • Unit dimensions: 18.89” x 6.49” x 1.73” inches. Unit weight: 4.43 lbs. Shipping dimensions: 20.47” x 8.46” x 4.33” inches. Shipping weight: 5.73 lbs
  • Inputs Sensitivity/Impedance. Mic: 1mV / 3 Kohms. Phono: 3mV / 47 Kohms. Tape, Tuner, CD, Aux: 150mV / 22 Kohms. Output/Impedance. Tape Rec: 150mV / 3 Kohms. Pre Output: max. 11V / 1 Kohms. Total Harmonic Distortation. Mic: less than 0.02%. Phono: less than 0.04%. Tape, Tuner, CD, Aux: less than 0.01%. Signal To Noise Ration. Mic: more than 70 dB. Phono: more than 90 dB. Tape, Tuner, CD, Aux: more than 100 dB
  • Frequency Response: 5Hz . 30kHz +0, -3 dB. Bass: 12dB at 100Hz. Midrange: 9dB at 1 Hz. Treble: 12dB at 10kHz. Loudness: 9/0/+9dB at 100/1k/10kHz. Mute: 20dB. Power Consumption: 15W
Bestseller No. 3
Skar Audio SKA7EQ 7 Band 1/2 DIN Pre-Amp Car Audio Graphic Equalizer with Aux Input and High Voltage RCA Outputs
  • 6 Channel 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer
  • Featuring 2 (Balanced & Selectable) RCA Inputs - Main and Auxiliary (Aux w/ Variable Gain Control) | THD: 0. 005%
  • High Voltage (Max Output Voltage - 7V) Gold Plated Pre-Amp RCA Outputs - Front, Rear, and Subwoofer (with Variable Subwoofer Level Control on Front of EQ)
  • 7 Fully Adjustable -12 dB to +12 dB EQ Bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with Built-in Fader Control
  • Take Full Control Over Your Car Audio System with this EQ | Signal-to-Noise Ratio: 100 dB, Low Pass Frequency Switch: 60 Hz / 120 Hz
SaleBestseller No. 4
Upgraded 3-Way Electronic Audio Crossover - Network Hi-Pass and Low-Pass Channel 12dB Octave Slope Power LED Indicator w/Remote Subwoofer Control and Parallel Input Switch - Lanzar Vibe VIBEX6
  • AUDIO CROSSOVER: Lanzar Vibe 3 way electronic crossover network features hi-pass and low-pass crossover. Hi-pass crossover has 32Hz - 800 kHz frequency response for front and rear channels. Low-pass crossover has 50Hz - 160 kHz for subwoofer channel
  • POWER LED INDICATOR: This indicator will light up when switching power supply is activated, and the unit is operational. Also, pack with remote subwoofer level control and parallel input switch, mixed in/out switch
  • SUBWOOFER FREQUENCY CONTROL: The Vibe X6 crossover network series gives you complete control of your sound with the stereo or mono switch. The subwoofer channel between 50 hz and 160 hz is for the selection of the low-pass crossover frequency
  • 12dB OCTAVE SLOPE: Your amplifier needs to be in order to make your speakers work their best. Lanzar Vibe X6 series has an exceptional 12dB per octave crossover slope to complete the package
  • SIZE: Lanzar upgraded audio crossover that measures 7.5''H x 7''W x 1.4''D. The X10 frequency multiplier for front channel, 40Hz - 120 kHz variable bass frequency provides full range and control of the speakers’ performance
Bestseller No. 5
Subwoofer Frequency Generator / Tester for Equalizers, Crossovers, Amplifiers, Subs, Car Stereos, Home Theaters and more
  • Generator low frequency test tones
  • Great for showing off subwoofers
  • 98hz down to and earth shaking 10hz
  • English (Publication Language)
Bestseller No. 6
Audio Control Three.2 in-Dash Pre-Amp Equalizer/Subwoofer Crossover with Dual Auxiliary Inputs
  • In-Dash Pre-Amp Equalizer / Subwoofer crossover with Dual Auxiliary Inputs In-dash Pre-Amp Controller Two input channels and two, four, or six channels of output
  • Stereo and Para-BASS equalization controls
  • On-board pre-amp line driver up to 13 volts peak Master volume control and fader Selectable illumination - Cool Blue or Hot Red LED's! Compact Β½ DIN chassis
SaleBestseller No. 7
2-Channel High Power MOSFET Amplifier - Slim 6000 Watt Bridgeable Mono Stereo 2 Channel Car Audio Amplifier w/Crossover Frequency and Bass Boost Control, RCA Input and Line Output - Lanzar VCT2610
  • 3000W RMS / 6000W MAX POWER: The Lanzar 6000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 3000W x 2 output at 4 ohms or 6000W x 1 bridged output at 2 ohms for a high quality audio
  • MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
  • SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
  • SLIM SIZE DESIGN: Measuring only 10.63''W x1.78''H x 21.97''L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation
Bestseller No. 8
Sound Storm SX310 2/3 Way Pre-amp Electronic Crossover with Remote Subwoofer Level Control
  • Parallel Input System - The front stereo input signals can be sent to the rear crossovers as well as delivered to the SUB crossover to create a 3 way audio system with only a pair of stereo inputs from your head unit
  • Selectable Crossover Slope - The SX310 gives you a choice of 6dB or 12dB per octave
  • Bass Boost - Custom tune the center frequency for the bass boost. This will hit hardest at the right frequency with the least amount of distortion
  • Phase Shift Selector - Depending on your subwoofer, its location or enclosure, your subwoofer might have overlapping sound waves causing cancellation. This feature will correct your out of phase issue
  • Independent Channel Output Level Controls - Improve the spatiality of the system by getting the right sound levels in each range of the frequency spectrum
Bestseller No. 9
BOSS Audio Systems BX55 2 3 Way Pre-Amp Car Electronic Crossover with Remote Subwoofer Control
  • Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control
  • Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz
  • Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz
  • Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees
  • Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz
Bestseller No. 10
Lanzar B52 Car Audio, Amplifier Monoblock, 1 Channel, 2,000 Watt, 2 Ohm, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG137) , BLACK
  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own.
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound.
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
  • GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets.

Are you Googling for top 10 great crossover amplifier for the budget in 2021? Our AI system had scanned more than 11,166 customer satisfaction about top 10 best crossover amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Upgraded 3-Way Electronic Audio Crossover – Network Hi-Pass and Low-Pass Channel 12dB Octave Slope Power LED Indicator w/Remote Subwoofer Control and Parallel Input Switch – Lanzar Vibe VIBEX6


Our rating:4.9 out of 5 stars (4.9 / 5)






3-Way Electronic Crossover Hi-Pass Crossover: 32Hz-800Hz For Entrance & Rear Channels X10 Frequency Multiplier For Front Channel Small-Pass Crossover: 50Hz-160Hz For Subwoofer Channel 18dB Per Octave Crossover Slope Variable Bass Frequency: 40Hz-120kHz Strengthen Level: -12dB Parallel Enter Swap, Combined In/Out Switch Distant Subwoofer Degree Handle Electric power On LED Indicator Proportions: 7.5H x 7W x 1.4D

Electric power LED INDICATOR: This indicator will light up when switching ability source is activated, and the unit is operational. Also, pack with distant subwoofer level command and parallel input change, blended in/out switch
SUBWOOFER FREQUENCY Management: The Vibe X6 crossover network series presents you comprehensive handle of your sound with the stereo or mono change. The subwoofer channel between 50 hz and 160 hz is for the choice of the reduced-pass crossover frequency
12dB OCTAVE SLOPE: Your amplifier needs to be in get to make your speakers operate their very best. Lanzar Vibe X6 sequence has an excellent 12dB for every octave crossover slope to total the package deal
Dimension: Lanzar upgraded audio crossover that steps 7.5”H x 7”W x 1.4”D. The X10 frequency multiplier for front channel, 40Hz – 120 kHz variable bass frequency supplies full array and management of the speakers’ overall performance

Leave a Comment