Top 10 Best car audio amplifier

Top 10 Best car audio amplifier in 2021 Comparison Table

Bestseller No. 1
Skar Audio SKv2-200.4D Full-Range Class D MOSFET 4-Channel Car Speaker Amplifier, 1800W Max Power
  • Competition Grade Class D 4-Channel MOSFET Car Power Amplifier
  • Peak Power at 2 Ohms: 465 Watts x 4 Channels (14.4v)
  • RMS Power at 2 Ohms: 320 Watts x 4 Channels (14.4v)
  • Stable at 2 Ohms, Frequency Response: 10 Hz - 40,000 Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
SaleBestseller No. 2
BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Class A/B Topology - Class β€˜A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class β€˜B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 3
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • Class A/B Topology - Class β€˜A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class β€˜B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 4
Sundown Audio Salt-4 Series Monoblock 4000W RMS Car Amplifier
  • SALT-4 4000D Monoblock 4000W RMS Amplifier
  • RMS Power - 1 ohm Mono: 4000W
  • Dimensions: L 23.5" x W 9" x H 3"
Bestseller No. 5
BLAUPUNKT AMP1404 1500W CAR Audio 4 Channel Amplifier (AMP1404)
  • BLAUPUNKT AMP1404 1500W CAR AUDIO 4 CHANNEL AMPLIFIER (
  • RCA Input:4 Channel
  • Max Output Power : 1500W
  • RMS Power(2 ohms):300WX4 / RMS Power(4 ohms):150WX4
  • 4/3/2 Channel / Amplifier class:AB
Bestseller No. 6
Skar Audio Dual 12" Complete 2,400 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
  • All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
  • Peak Power: 2,400 Watts, RMS Power: 1,200 Watts
  • Includes x1 Skar Audio SDR-2X12D4 Dual 12" Loaded 2,400 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
  • Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
Bestseller No. 7
Rockville dBcomp5 Mono Competition Amplifier 3500w RMS! Car Audio Amp
  • Features: Rockville dBcomp5 Mono Competition Amplifier 3500w RMS Dyno-Certified! Car Audio Amp.
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 1 Ohm: 3500 Watts x 1 Channel <1% THD+N at 14.4 volts (83% efficiency). 2 Ohm: 2200 Watts x 1 Channel <1% THD+N at 14.4 volts (80% efficiency). Digital voltage display on amp. External 350A fuse.
  • High-Speed MOSFET Power Supply. Optical Coupler Class β€œD” Technology. Fully Adjustable 24dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Limiter ON/OFF Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control.
  • Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Power/Protect/Clip LED Indicators on control panel. Power/Protect/Clip LED Indicators on Remote control. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V.
  • Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. Dimensions: (W x H x L) 9" x 2.4" x 23.7"
SaleBestseller No. 8
BOSS Audio Systems R1004 4 Channel Car Amplifier – Riot Series, 400 Watts, Full Range, Class A/B, 2 Ohm Stable, IC (Integrated Circuit) Great for Car Speakers and Car Stereos
  • Power - 100 Watts Max x 4 @2-Ohms, 50 Watts Max x 4 @4-Ohms
  • Class A/B Topology - Class β€˜A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class β€˜B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
Bestseller No. 9
Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
SaleBestseller No. 10
Audiobank Monoblock 2000 WATTS Amp Class AB Car Audio Stereo Amplifier P2001 Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation Remote On/Off Circuit
  • 2 Ohm Stable Operation & Soft Turn On Circuit
  • Thermal and Speaker Short Protection Circuitry
  • Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
  • Remote Turn-On / Turn-Off Circuit
  • LED Power and Protection Indicators

Are you Googling for top 10 great car audio amplifier for your budget in 2021? Our team had scanned more than 66,254 customer satisfaction about top 10 best car audio amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: 4-Channel High Power MOSFET Amplifier – Slim 2000 Watt Bridgeable Mono Stereo 4 Channel Car Audio Amplifier w/ Crossover Frequency and Bass Boost Control, RCA input, and Line Output – Lanzar VCT4110


Our rating:4.9 out of 5 stars (4.9 / 5)






Lanzar Model : VCT4110
MOSFET Electricity Supply: This effective amplifier is equipped with steel oxide semiconductor area-effect transistors to speedily change from whole to non-conduction for significant performance output
Brief CIRCUIT Defense: This 4 ch amp is also equipped with a 2×30 amp maxi form fuse to guard the amplifier and the electrical program of your motor vehicle from thermal / overload / limited circuit situations
Trim Sizing Layout: Measuring only 10.63” W, 1.78” H, and 14.02” L, this amplifier has a trim sizing design and style and comes entire with all essential mounting hardware for simple installation

Leave a Comment