Top 10 Best car amplifier 1100 watts

Top 10 Best car amplifier 1100 watts in 2021 Comparison Table

Bestseller No. 1
BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
  • Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
  • Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
  • Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
SaleBestseller No. 2
POWERZONE 2-Channel Class AB Amp (1,100 Watts)
  • 1, 100 watts mono Bridged @ 4 ohms
  • 275 watts x 2 @ 4 ohms
  • 550 watts x 2 @ 2 ohms
  • 0 to 9 dB bass boost
  • Red heat sink elements
Bestseller No. 3
Autotek AYA-1100.4 Alloy Series Four Channel Car Audio Amplifier (Silver) – Class A/B Amp, 1100 Watt, Wired Bass Remote Included, Variable Electronic Crossover
  • Minimize Distortion – Highest sound quality connection with quality RCA materials helps prevent interference and distortion in the signal path. Easily tie into OEM audio system that do not offer RCA output to maximize after-market amp power.
  • Built for Powerful Sound – Maximize power efficiency while improving sound quality and minimizing distortion with the high speed Pro-Fi MOSFET components. A high energy power supply delivers power with minimal impact on the electrical system.
  • Class A/B Amplifier – Class A/B topology and low noise preamplifier circuitry produces high quality sound and allows the amplifier to develop high levels of power with minimal distortion.
  • Aluminum Heat Sink – Quick Thermal Dispersion (QTD) technology assures additional mass in the aluminum heat sink keeping the amplifier running cool, with nearly undetectable distortions during normal use when listening to music.
  • High Quality Connections – Nickel plated brass connection with terminals allows secure connections while resisting corrosion. Screw down connectors allow for easy access with hand tool for quick and secure connection.
SaleBestseller No. 4
Hifonics BRX1116.1D Brutus Mono Super D-Class Subwoofer Amplifier, 1100-Watt
  • Ultra-fine mosfets circuit maximizing power efficiency while improving sound quality
  • LED power (Green) and protect (Red) indicators
  • Manufactured in China
Bestseller No. 5
DS18 S-1100.2/SL Car Audio Amplifier – Full-Range, Class Ab, 2 Channel Amplifier, 1100 Watts (Silver)
  • AMAZING POWER IN AN EFFICIENT PACKAGE - Capable of 1100 Watts Max Power You'll have all the power you need while utilizing state-of-the-art technology that requires less energy
  • PROTECTION CIRCUITRY – Against Overload Short Circuit Thermal Low Voltage High Voltage and Reverse Polarity These Protection Features Are Designed to Protect the Amplifier From Misuse As Well As From Common Causes Of Amplifier Failure
  • PLATINUM FINISH CONNECTIONS – Ensure solid electrical connections that resist corrosion Fully Variable crossovers promote installation ease and save the cost of outboard crossovers
  • FULL RANGE AMP - If you are looking for an amplifier that can handle the full frequency range then look no further! Wire the most powerful midranges tweeters drivers or coaxial to this full range series
  • NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market
Bestseller No. 6
Autotek AYA-1100.1 Alloy Series Mono Subwoofer Car Audio Amplifier (Silver) – Class A/B Amp, 1100 Watt, Wired Bass Remote Included, Variable Electronic Crossover
  • Minimize Distortion – Highest sound quality connection with quality RCA materials helps prevent interference and distortion in the signal path. Easily tie into OEM audio system that do not offer RCA output to maximize after-market amp power.
  • Built for Powerful Sound – Maximize power efficiency while improving sound quality and minimizing distortion with the high speed Pro-Fi MOSFET components. A high energy power supply delivers power with minimal impact on the electrical system.
  • Class A/B Amplifier – Class A/B topology and low noise preamplifier circuitry produces high quality sound and allows the amplifier to develop high levels of power with minimal distortion.
  • Aluminum Heat Sink – Quick Thermal Dispersion (QTD) technology assures additional mass in the aluminum heat sink keeping the amplifier running cool, with nearly undetectable distortions during normal use when listening to music.
  • High Quality Connections – Nickel plated brass connection with terminals allows secure connections while resisting corrosion. Screw down connectors allow for easy access with hand tool for quick and secure connection.
SaleBestseller No. 7
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
SaleBestseller No. 8
BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 9
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 10
Crunch SA-1100.2 Smash Series 1,100-Watt 2-Channel Class AB Amp
  • 2 channels x 35 watts at 2 ohms
  • 2 channels x 30 watts at 4 ohms
  • 1 channel x 60 watts (mono bridged) at 4 ohms
  • Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
  • Fully adjustable variable electronic crossover: 12 dB per octave

Are you searching for top 10 great car amplifier 1100 watts in the market in 2021? Our AI system had scanned more than 48,451 customer satisfaction about top 10 best car amplifier 1100 watts in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Autotek AYA-1100.1 Alloy Series Mono Subwoofer Car Audio Amplifier (Silver) – Class A/B Amp, 1100 Watt, Wired Bass Remote Included, Variable Electronic Crossover


Our rating:4.2 out of 5 stars (4.2 / 5)






Be great and keep amazing with the Autotek Alloy Sequence 1,100 Watt Monoblock Class AB Amp! Showcasing a compact design even though keeping awesome, the Alloy Sequence delivers unrivaled clarity to subwoofers and speakers. Included with created-in electronic crossovers and large-level inputs, Autotek Alloy products very easily tie into OEM (manufacturing facility) audio units that do not present RCA output as well as ones that do. Straightforward, under-seat self-set up will have you taking pleasure in Alloy stages of clarity in no time. This Alloy monoblock amp is built to electricity subwoofers and comes with a wired bass distant.

Crafted for Impressive Sound – Maximize power efficiency while increasing sound good quality and minimizing distortion with the high velocity Professional-Fi MOSFET elements. A large electricity ability offer delivers power with negligible impact on the electrical procedure.
Class A/B Amplifier – Class A/B topology and very low sounds preamplifier circuitry makes superior excellent sound and will allow the amplifier to acquire significant concentrations of power with nominal distortion.
Aluminum Heat Sink – Fast Thermal Dispersion (QTD) engineering assures more mass in the aluminum warmth sink trying to keep the amplifier jogging great, with nearly undetectable distortions all through ordinary use when listening to songs.
Significant Excellent Connections – Nickel plated brass link with terminals permits safe connections even though resisting corrosion. Screw down connectors let for simple obtain with hand tool for swift and protected relationship.

Leave a Comment