Top 10 Best boss audio r1100m riot amplifier

Top 10 Rated boss audio r1100m riot amplifier in 2021 Comparison Table

Bestseller No. 1
BOSS Audio R1100M - Riot 1100 Watt, 2/4 Ohm Stable Class A/B, Monoblock, MOSFET with Remote Subwoofer Control (Renewed)
  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com
  • 1100 W MAX Power @ 2 Ohm x 1 Channel
  • 550 W MAX Power @ 4 Ohm x 1 Channel
  • High and Low Level Inputs; Frequency Response 9 Hz to 50 kHz Β±1 dB
  • Variable Low Pass Crossover, Variable Bass Boost
Bestseller No. 2
BOSS Audio Systems R2504 - Riot 1000 Watt, 4 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Car Amplifier with Remote Subwoofer Control
  • 1000 W MAX Power 4 Channel
  • 188 W X 4 RMS @ 2 ohm; 94 W X 4 RMS @ 4 ohm; 375 W X 2 RMS Bridged @ 4 ohm
  • Full-Range, Class A / B Topology, MOSFET Power Supply
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost
  • Remote Sub woofer Control
Bestseller No. 3
BOSS Audio Riot R1100M Mono Car Amp Amplifier Plus Sub Bass Remote + Wiring Kit
  • Amplifier**
  • NEW **BOSS R1100M** 1100 Watt Mono Car Audio Power Amplifier
  • 1100 Watt Max
  • Max Power: 1100 Watt x 1 Channel @ 2 Ohm
  • RMS Power: 250 Watt x 1 Channel @ 4 Ohm
SaleBestseller No. 4
BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock, Class A/B, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply, Stereo
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class β€˜A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class β€˜B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
SaleBestseller No. 5
BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Class A/B Topology - Class β€˜A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class β€˜B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
SaleBestseller No. 6
BOSS Audio Systems R1002 Car Amplifier - 2 Channel, 200 Watts Max Power, 2 4 Ohm Stable, Class AB, Full Range
  • POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.
  • WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com
Bestseller No. 7
BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
  • Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
  • Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
  • Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class β€˜A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class β€˜B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
Bestseller No. 8
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
  • Class A/B Topology - Class β€˜A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class β€˜B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
Bestseller No. 9
BOSS Audio OX3KD Class D Car Amplifier – 3000 Watts, 1 Ohm Stable, Digital, Monoblock, MOSFET Power Supply
  • POWER: 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms. DIMENSIONS: The OX3KD is 12.3 inches in Depth, 7 inches in Width and 2.3 inches in Height. It weighs 6.5 lbs.
  • CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • STRAPPING CAPABLE: You are able to strap TWO OX3KD amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Bestseller No. 10
BOSS Audio Systems BAB10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space
  • BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer
  • PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable
  • VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BAB10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

Are you looking for top 10 good boss audio r1100m riot amplifier for the budget in 2021? We had scanned more than 22,943 customer satisfaction about top 10 best boss audio r1100m riot amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: BOSS Audio Riot R1100M Mono Car Amp Amplifier Plus Sub Bass Remote + Wiring Kit


Our rating:4.6 out of 5 stars (4.6 / 5)






This Package Features: 1 x Boss Audio R1100M 1100 Watt Amplifier 1 x 4 Gauge Wiring Kit The **Boss R1100M** 1100 Watt Mono Motor vehicle Audio Electrical power Amplifier provides a MAX output of 1100 watts and an RMS output of 250 watts! This Course A/B amplifier attributes a MOSFET energy offer, an impedance of 2 ohms, a line output, very low pass crossover, and an illuminated Manager symbol! The Boss R1100M 1100 Watt Mono Car Audio Electricity Amplifier is the perfect amp to energy your auto audio technique! RMS Power: 250 Watt x 1 Channel @ 4 Ohm Boss Illuminated Brand Class A/B

NEW **Boss R1100M** 1100 Watt Mono Auto Audio Power Amplifier
1100 Watt Max
Max Electrical power: 1100 Watt x 1 Channel @ 2 Ohm
RMS Ability: 250 Watt x 1 Channel @ 4 Ohm

Leave a Comment