Top 10 Best bluetooth amplifier board

Top 10 Best bluetooth amplifier board in 2021 Comparison Table

Bestseller No. 1
Bluetooth Amplifier Board 2.1 2X50W+100W 12V-24V Audio Power Amplifier Module Bass and Treble Control for Store Home Theater Speakers with Antenna
  • [2-in-1] High quality power amplifier board. With AUX and Bluetooth two audio input methods, 2-in-1. 5.0 Bluetooth version, the transmission efficiency is higher, the transmission distance is farther
  • [High Performance] Bluetooth audio amplifier module 2.1 channel, Max output power 2X50W+100W. With antenna and antenna base, the signal is better, the efficiency is high, and the anti-interference ability is strong
  • [Protection Mechanism] With short-circuit protection as well as overcurrent, overheating, and anti reverse connection protection to prevent total failure. In the event of an overload, the device reports the fault condition to the processor to protect itself from damage
  • [High Quality] It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Free DC head lead, compatible with the input power interface of this product, even if you don't have a DC head adapter or battery, it can be easily wired
  • [Application] With bass, treble, subwoofer frequency and volume control, easy to adjust volume, enjoy the music tone what you want. Widely used in store solicitation, home theater, square speakers, etc
SaleBestseller No. 2
UWAYKEY Bluetooth Amplifier Board 2.1 Channel Class D AMP Module with Dual TPA3116D2 Chip
  • 【TPA3116D2 HIFI Chip Solution】 Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 12-24V;
  • 【Treble & Bass Control】 If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater
  • 【Bluetooth and AUX Function】 Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug
  • 【Safety Protection】 This Amp Board Has Overheat Protection, Reverse protection, Circuit Protection, Over-voltage and Under-voltage Protection
  • 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer
Bestseller No. 3
DAMGOO Bluetooth 100W+100W Stereo Audio Amplifier with Treble and Bass Adjustment, Bluetooth and AUX Inputs and USB Sound Card Mode, BT 5.0 Power AMP for DIY Wireless Speakers
  • HIFI CHIP:XY-502B Adopt TPA3116D2(with AM Interference Suppression Function) Chips, With Excellent Sound Quality. It Ensures That Even With High Power Operation For A Long Time, THD Is Less Than 0.1%.
  • WIDE INPUT VOLTAGE: DC 9V-24V, Can Be Powered by 9V/12V/15V/18V/24V
  • TWO AUDIO INPUT WAYS:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the Headphone (Line in) Way
  • PROTECTIVE FUNCTION:This BT Amp Is Designed with Protective Case, Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection
  • TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!
SaleBestseller No. 4
Bluetooth 100W+100W Amplifier Board with Treble and Bass Control, DC 9-24V, BT and AUX Inputs, 2.0 Channel Stereo AMP Board for DIY Wireless Speakers, Password Free
  • DUAL TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 12-24V;
  • Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.;
  • Bluetooth and AUX Function: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.;
  • Safety Protection: This Amp Board Has Overheat Protection, Circuit Protection, Over-voltage and Under-voltage Protection;
  • 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.
Bestseller No. 5
200W Bluetooth Amplifier Board TPA3116,DAMGOO 100W+100W Audio Amp Board with LC Filter Technique,Dual Channel DC8-24V,Password Free Connect to Phone Quietly
  • CHIP: DUAL TPA3116 HIFI Chip with AM Interference Suppression Function, 100W*2 Output Power
  • WIDE INPUT VOLTAGE RANGE: DC 9V-24V with 5.5 * 2.1mm Interface, Laptop Power Supply Is a Good Choice
  • BLUETOOTH & AUX INPUT:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the 3.5MM Headphone (Line in) Way
  • PROTECTIVE FUNCTION:Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection, This means that the Bluetooth amplifier board is not easily damaged
  • TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!
SaleBestseller No. 6
AIYIMA DC12V-24V 2.1 Channel TPA3116 Subwoofer Amplifier Board High Power BT Audio Amplifier Board 50W+50W+100W (BT Amp)
  • 100W Subwoofer Amplifier Board;BT 5.0 Power Amplifier,Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz
  • Operating voltage range: DC 12-24V(maximum voltage is no more than 24V); built-in TPA3116 amplifier chip;This is a pre-amplifier, bass frequency processing, with bass volume potentiometer control of the bass amplifier board.
  • DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output
  • Audio input sensitivity: 500 mv;Speaker impedance: bass speaker impedance: 2-8 ohm
  • You can use a good switching power supply adapter, laptop switching power supply, Here is our 24V power Adapter link:https://www.amazon.com/dp/B07R28RW4H
Bestseller No. 7
DAMGOO Bluetooth 5.0 Amplifier Board,100w Audio Amp Board Dual Channel DC8-24V,Easy Installation and Password Free Connect to Phone Quietly
  • HIFI CHIP:ZK-502C Adopt TPA3116D2(with AM Interference Suppression Function) Chips, With Excellent Sound Quality. It Ensures That Even With High Power Operation For A Long Time, THD Is Less Than 0.1%
  • WIDE INPUT VOLTAGE: DC 9V-24V, Can Be Powered by 9V/12V/15V/18V/24V
  • TWO AUDIO INPUT WAYS:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the Headphone (Line in) Way
  • PROTECTIVE FUNCTION:This BT Amp Is Designed with Protective Case, Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection
  • TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!
Bestseller No. 8
DAMGOO Bluetooth Amplifier Board, 100W+100W Peak Output Power, 2.0 Channel DC:8-24V, Password Free Connect, BT 5.0 AMP Board for DIY Wireless Speakers Board
  • Output Power: 100w+100w Output Power, Wide Voltage Input: 5V-24V, Can Be Powered by 9V/12V/15V/19V/24V. Adapter speaker 4-8Ω (50w-150w)
  • Bluetooth 5.0: User Can Directly Connect with Wireless Bluetooth 5.0 without Password
  • Easy Installation and Short Start-up Sound: The Illustration Of Each Interface Is Printed On The Protective Plate, Making It Easy To Install Even Without Instructions. The Sound of The Amp Board To Start And Connect To Bluetooth Is Short Rather Than Not a Asian Woman's voice.
  • Protective Function:This BT Amp Is Designed with Protective Case, Over-heat Protection, Short-circuit Protection
  • Note: Please Use A Power Adapter With Sufficient Power To Connect The Amp Board, Otherwise The Sound Will Be Distorted. And Make Sure The AMP Board Is Away From The Wifi Signal.
SaleBestseller No. 9
DAMGOO 50W+50W+100W 2.1 Channel Subwoofer Amplifier Board with Treble and Bass Control, Dual TPA3116 Chip, DC 12-24V, Bluetooth and AUX Inputs, DIY Wireless Speakers AMP Board, Password Free
  • TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 12-24V;
  • Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.;
  • Bluetooth and AUX Function: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.;
  • Safety Protection: This Amp Board Has Overheat Protection, Reverse protection, Circuit Protection, Over-voltage and Under-voltage Protection;
  • 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.
Bestseller No. 10
DAMGOO Bluetooth 50W+50W Stereo Audio Amplifier Board with Treble and Bass Control, Bluetooth and AUX Inputs, BT 5.0 AMP Board for DIY Wireless Speakers Board, Easy Installation and Password Free
  • TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 9-24V;
  • Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.;
  • Bluetooth and AUX Function: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.;
  • Safety Protection: This Amp Board Has Overheat Protection, Circuit Protection, Over-voltage and Under-voltage Protection;
  • 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.

Are you looking for top 10 best bluetooth amplifier board on the market in 2021? We had scanned more than 59,937 customer satisfaction about top 10 best bluetooth amplifier board in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Bluetooth Amplifier Board 2.1 2X50W+100W 12V-24V Audio Power Amplifier Module Bass and Treble Control for Store Home Theater Speakers with Antenna


Our rating:4.3 out of 5 stars (4.3 / 5)






Parameter
[2-in-1] High high-quality electric power amplifier board. With AUX and Bluetooth two audio input methods, 2-in-1. 5. Bluetooth variation, the transmission efficiency is larger, the transmission length is farther
[High Performance] Bluetooth audio amplifier module 2.1 channel, Max output electric power 2X50W+100W. With antenna and antenna foundation, the sign is far better, the performance is high, and the anti-interference capacity is robust
[Protection Mechanism] With short-circuit security as nicely as overcurrent, overheating, and anti reverse link security to reduce full failure. In the function of an overload, the unit experiences the fault affliction to the processor to secure by itself from hurt
[High Quality] It adopts copper DC connector and fence style terminal. It can withstand significant present-day, no heat, no damage to the wire. Free of charge DC head guide, suitable with the input power interface of this products, even if you really don’t have a DC head adapter or battery, it can be easily wired
[Application] With bass, treble, subwoofer frequency and volume manage, straightforward to alter quantity, enjoy the tunes tone what you want. Extensively made use of in store solicitation, household theater, sq. speakers, etc

Leave a Comment