Top 10 Best antenna splitter amplifier

Top 10 Best antenna splitter amplifier in 2021 Comparison Table

SaleBestseller No. 1
Antennas Direct 4-Port TV Distribution Amplifier, Connect Up to 4 Televisions to 1 Antenna, Power Supply, Coaxial Cable, for Indoor Use, 4K Ready, Silver - CDA4
  • Connect one TV antenna to 4 rooms while boosting signal in each location for reliable reception
  • Weatherproof indoor / outdoor housing (power supply component for indoor use only)
  • 7.5dB amplification per port
  • Includes distribution amplifier, power supply, 3ft coaxial cable for power supply, and instructions
Bestseller No. 2
Channel Master Ultra Mini 4 TV Antenna Amplifier, TV Antenna Signal Booster with 4 Outputs for Connecting Antenna or Cable TV to Multiple Televisions (CM-3414),White
  • Four Amplified Output Ports (8 dB)
  • Works with all TV Antennas & CATV Installations (Not Compatible with Satellite)
  • Improves Signal Strength, Decreases Pixelation and May Increase Number of Channels
  • Miniature Size for Space-Saving Installations
  • Powder Coated and Weather-Sealed Housing Allows for Indoor or Outdoor Installation in any Climate
SaleBestseller No. 3
9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier with Active Return Zero Signal Loss VoIP Telephone Bypass Port and F59 Terminators Antronix VR900B/AC
  • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
  • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
  • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
  • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
  • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Does not include connection cables. Includes three F59 terminators.
Bestseller No. 4
GE 4-Way TV Antenna Amplifier Splitter Clears Up Pixelated Low-Strength Channels Distributes Signal to Multiple TVs 50-1006MHz Low Noise Antenna Signal Booster HD Digital VHF UHF Indoor 34479
  • SIGNAL BOOSTER – This amplifier will enhance and strengthen the signal received by your indoor/outdoor non-amplified passive TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
  • 4-WAY SPLITTER – Works with all brands of TVs and passive antennas to distribute one audio/video source to up to four devices with F-type coaxial connectors. This will require coaxial cable (sold separately).
  • EASY INSTALLATION – Simple to set up and comes with an AC power adapter user manual and installation instructions.
  • U.S.-BASED TECHNICAL SUPPORT – Backed by a limited-lifetime replacement pledge and free U.S.-based technical support that is available Monday – Friday, 7AM-8PM, Central Time to assist with any questions or issues.
Bestseller No. 5
4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter with Passive Return, Black Coax Power Cable, F59 Terminators (Antronix MRA4-8)
  • Four port amplifier with a passive return path provides an increase of +7.5 db per port. Reduces snow and prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception.
  • Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Exceeds all SCTE Standards. 3 dB Noise Figure provides clean amplification of weak signals to overcome the poor noise figure in TV tuners and converters.
  • 6 kV surge protection for protection against lightning strikes. The nickel plated housing provides the excellent corrosion resistant protection against salt fog and rust. 1 Year Warranty.
  • PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times.
  • Kit includes Amplifier, Power Supply, 36 inch custom super-flexible power cable, and two 75-ohm port terminators. Note: The included cable is for power only, not for cable TV signals.
Bestseller No. 6
4-Port Cable TV/Antenna/HDTV/Internet Digital Signal Amplifier/Booster/Splitter/Equalizer with Passive Return, F59 Terminators (Lindsay LSA84-EQ8)
  • This is a TV signal amplifier which provides one input and four outputs, for connecting multiple TV sets or cable boxes. Allows multiple devices to connect to an antenna or cable system without losing signal quality.
  • Amplifier includes an integrated equalizer which varies amplifier gain. The equalizer provides more amplification to high frequency signals, which tend to get weaker over long cable runs. All ports provide an amplified signal, with a minimum gain of +0dB @ 54MHz up to +7.5dB gain @ 1000MHz.
  • Suitable for Antenna or Cable TV use. Compatible With All Standard And Digital Cable TV Services, OTA Antenna Reception. Not compatible on systems with an existing amplifier or pre-amplifier. Not compatible with satellite systems.
  • Meets or exceeds all SCTE Standards. PTC Short-Circuit Protected UL Listed Adaptor - Self-resetting circuit protection provides safe protection against short-circuits to minimize outage times. Amplifier has 6 kV ring wave surge design for protection against voltage spikes. Operating temperature: -40 to +60 ΒΊC (-40ΒΊF to +140ΒΊF). 15 PSI weather-tight seal.
  • Prevents image pixelation with digital cable, boosts antenna (OTA) signals for distribution to multiple TVs. May improve cable modem performance. May improve HDTV reception. Includes Amplifier, Power Supply, and two 75-ohm terminators.
Bestseller No. 7
Professional RF Cable TV Signal Amplifier with High 50dB Gain
  • Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation.
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing.
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution.
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels.
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat dissipation and long durability.
Bestseller No. 8
9 Port Bi-Directional Cable TV Splitter Signal Booster/Amplifier Kit with Active Return Zero Signal Loss VoIP Telephone Bypass Port includes F59 Terminators and 3' Custom Dedicated Power Cable
  • Compare to Electroline EDA-FT08300 or PCT VC9U. Provides 8 amplified output ports with Active Return.All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
  • MODEM port provides a connection point for VoIP equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
  • All models equipped with CamPort auto seizing F-ports.The all ports facing down configuration provides clean wiring in any orientation.
  • 6 kV Surge Protection and PTC Short-Circuit Protected UL Listed Adaptor - Unique surge protection provided on all RF ports. Self-resetting circuit protection provides safe protection against short-circuits.
  • Powder Coated Aluminum Housing - Provides the most corrosion resistant protection against salt fog and rust. 5-year manufacturer warranty on amplifier only - not power supply. Complete kit includes Amplifier, Power Supply, three F59 terminators and Reliable Cable Superflex power connection cable.
Bestseller No. 9
PBD 4 Way Amplified Splitter Clears Up Pixelated Low-Strength Channels Distributes Signal to Multiple TVs Antenna Signal Booster
  • 4 WAY SPLITTER – Works with all brands of TVs and passive antennas to distribute one audio / video source up to four devices with F-type coaxial connectors. This will require coaxial cable (not included).
  • SIGNAL BOOSTER – PBD amplifier will enhance and strengthen the signal received by your indoor / outdoor TV antenna. Amplifiers will clear up any low-strength fuzzy or pixelated channels – in some cases the number of channels you receive may change depending on your distance from the local broadcast towers.
  • EASY INSTALLATION – Simple to set up and comes with an AC power insert and installation instructions.
  • NOTE: Using an amplifier does not guarantee you will pick up more TV channels even though your signal is amplified; dependencies include location of TV towers, building materials, and the actual antenna being used.
Bestseller No. 10
Extreme Broadband IPA1008D-RSVF - 8 Way Splitter
  • Provides 8 amplified output ports with Active Return. All ports are LOSSLESS both forward and reverse. This is a true lossless 8-port splitter.
  • VoIP/MODEM port provides a connection point for critical equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the "Triple Play" phone service.
  • Unique mounting design allows for horizontal or vertical mounting in any space. One year warranty on amplifier only. Ninety day warranty on Power Supply.
  • NOT COMPATIBLE WITH SATELLITE TV SYSTEMS. Does not include connection cables.
  • Kit includes Amplifier, Power Supply, and Extreme Power Inserter.

Are you finding for top 10 good antenna splitter amplifier for the budget in 2021? We had scanned more than 27,848 customer satisfaction about top 10 best antenna splitter amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:

Our Best Choice: Extreme Broadband IPA1008D-RSVF – 8 Way Splitter


Our rating:4.5 out of 5 stars (4.5 / 5)






The Extreme Advantage In today’s rapidly changing cable industry, Extreme Broadband allows broadband networks to stay one step ahead by offering the most innovative broadband products available. With over two decades of experience designing advanced broadband components, we can enhance your system’s performance and provide comprehensive technical support. Advanced Technology And Industry Leadership Extreme Broadband Engineering delivers innovative products engineered to power the most advanced broadband networks. We draw on the knowledge and experience of leading broadband experts to offer state-of-the-art components that help your system stay at the forefront of the fast-changing technological marketplace. In addition to our technical expertise, we provide total customer support as part of a holistic approach to meet your current and future needs. FIC-Port Technology The new Infinity Premise system of broadband amplifiers and external modules features our patented direct-connect FIC-Port (TM) interface connector technology. This unique design eliminates the use of jumper cable interfaces, saving installation time and cost. Housing Design The Extreme engineered housing provides excellent mechanical integrity, which results in both superior mechanical and electrical performance. Each housing is die cast from zinc alloy and is then plated for maximum corrosion protection. These features provide a strong housing, which has been time-tested for durability and protection against long term environmental elements. The back cover is also made of a zinc alloy, which, when mated with the zinc alloy housing, eliminates corrosion due to dissimilar metals. The back cover is 100 percent soldered to the housing, giving exceptional RFI and EMI isolation and protection.

VoIP/MODEM port provides a connection point for critical equipment, so that a power failure will not affect services. Compatible with all standard and digital Cable TV services, including the “Triple Play” phone service.
Unique mounting design allows for horizontal or vertical mounting in any space. One year warranty on amplifier only. Ninety day warranty on Power Supply.
NOT COMPATIBLE WITH SATELLITE TV SYSTEMS. Does not include connection cables.
Kit includes Amplifier, Power Supply, and Extreme Power Inserter.

Leave a Comment