Top 10 Rated 8 ohm amplifier in 2021 Comparison Table
Bestseller No. 1
Rockville 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp (RPA12)
- Rockville RPA12 5000 Watt peak/ 1400W RMS 2 channel power amplifier Pro/DJ amp
- Lcd displays volume in DB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged Mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
- Parallel Mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in Crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or subwoofer(s). channel a & B clipping LED indicators. Channel a & B separate level controls. Power, Signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles
- Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-Ohm speakers. Level controls for precise setting and matching of sensitivity. Computer controlled ice protection circuitry against speaker short circuit, Thermal over load, DC over load. User serviceable fuse (15A, 250V). frequency response (bandwidth @ 2VRMS out, @ -3.0dB) 10 Hz – 30 kHz. Thd + noise @ 1kHz full power: <0.03%
- Input impedance: 10K ohm balanced. Input signal voltage: 660mV – 1.5V. Input sensitivity: 0.7V. Damping factor: ( 100Hz, 10W, 4 ohms): 40.8. Damping factor: (1kHz @ 8 ohm): >400: 1. Effective Damping factor (100Hz, 10W, 4 ohms) 1.08. Output Impedance at speaker terminals: 0.09803 ohms. Frequency response vs THD+N (worst case, across normal bandwidth 1W) 0.11%. signal to noise ratio: > 100dB. Imd 60Hz & 1kHz, 4: 1: <0.04%
Bestseller No. 2
Sound Storm Labs EV4.1600 Evolution 1600 Watt 4 Channel 2 to 8 Ohm Stable Class A B Full Range Bridgeable Mosfet Car Amplifier with Remote Subwoofer Control
- 400 W MAX Power @ 2 Ohm x 4 Channels
- 200 W MAX Power @ 4 Ohm x 4 Channels
- 800 W MAX Bridged Power @ 4 Ohm x 2 Channels
- Full-Range, Class A / B Topology, MOSFET Power Supply
- Low and High Level Inputs, Variable Low Pass Crossover, Variable High Pass Crossover
Bestseller No. 3
OSD Audio 1000W Mono-Channel Class D Subwoofer Amplifier – Onboard DSP, 4-8 Ohm – SMP500
- The SMP500 is designed for use with higher wattage passive subwoofers that require external power with up to 1000 watts power peak / 400 watts RMS with 4 ohms. It has highly efficient Class D technology to run cool under demanding loads.
- SOUND QUALITY: Get a deep, crisp, clean low-frequency sound effect in dedicated home theater systems and media rooms to improve the overall sound quality of surround sound systems with dual 100/220 voltage.
- BASS: This amplifier improves bass response of passive subs with a variable high-cut filter and a front panel control knob that routes higher frequencies to main speakers for low frequency sound effects.
- CONTROL FEATURES: The SMP500 includes front-mounted power and back panel adjustable gain. A volume control limiter protects the woofers while low and high level pass-through inputs/outputs for greater flexibility.
- DESIGN: Rack mountable, the SMP500 supplies in-wall or stand-alone subwoofers with the power they need. CE & ETL rated with an auto sensing feature that automatically turns the amp on or off when a signal is detected. A remote control is included.
Bestseller No. 4
Pyle Hydra Marine Amplifier - Upgraded Elite Series 240 Watt 4 Channel Audio Amplifier - Waterproof, 4-8 Ohm Impendance, GAIN Level Controls, RCA Stereo Input & LED Indicator (PLMRA120)
- PREMIUM 4 CHANNEL AMPLIFIER: Pyle’s PLMRA120 is engineered as a 4 Channel marine amplifier that allows high quality stereo reproduction from source. This will power up your speaker and universally compatible with a variety of head units.
- RCA STEREO INPUT: For an easier use of this hydra marine amplifier, it comes with premium RCA inputs. If your marine receiver lacks RCA output jacks, you can connect speaker output leads to the high-level terminal inputs.
- SHORT PROTECTION: Built with a heavy duty Aluminum Alloy heatsink, thermal overload speaker short protection and LED light indicator. These are to protect the amp and your vehicle's electrical system from short circuit conditions.
- POWERFUL 240 WATT: This amplifier is powerful with its IC Power 120 Watts x 2 Output power supply. Comes with dual adjustable input GAIN level controls between 4 or 8 Ohm speaker impedance.
- MARINE GRADE: With its Marine rating of IP-01, it is waterproof ready. It’s constructed with gold-plated speaker output terminal connectors as well to combat corrosion with long term use.
Bestseller No. 5
BOSS Audio Systems PT1600 2 Channel Car Amplifier – Phantom Series, 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
- Power - 800 Watts Max x 2 @2-Ohms 400 Watts Max x 2 @4-Ohms 1600 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
SaleBestseller No. 6
BOSS Audio Systems PT1000 2 Channel Car Amplifier - 1000 Watts, Full Range, Class A/B, 2-8 Ohm Stable, Mosfet Power Supply, Bridgeable
- Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
SaleBestseller No. 7
Rockville Rock 4 Zone 70 Volt Commercial Amplifier+Matrix Source Routing
- What's in the Box: Matrix Amplifier. Remote. Detachable Rack mount ears. Power Cable. Owners manual. Warranty.
- Features: Rockville ROCK MATRIX 4 Zone 70 Volt Commercial Amplifier. 440 Watts Total RMS @ less than 1 % THD (110 Watts RMS per zone x 4 Zones). Route Any Sources to Any Zones. 4 separate zone output and you can route any source to any zone and also route a microphone input to specific zone(s).
- Supports multi zone installations using 70 volt, 100 volt, 16 ohm, 8 ohm, and 4 ohm speaker set ups. 4 line/mic inputs (2 of the mic inputs have selectable phantom power for condenser mics). 19" rack mountable (removable rack brackets). Built in 1w monitor speaker allows you to listen to playback on any zone. 100 volt RMS Power: 4 x 110 Watts RMS. 70 volt RMS Power: 4 x 110 Watts RMS. 4 ohm RMS power: 4 x 110 Watts RMS.
- 8 ohm RMS power: 4 x 110 Watts RMS. 16 ohm RMS power: 4 x 110 Watts RMS. Built in Bluetooth 5.0 chip allows audio streaming with matrix assigning to any zone(s). USB input to play audio stored on a thumb drive with matrix assigning to any zone(s) (32gb max). SD card slot to play music stored on an SD Card with matrix assigning to any zone(s) (32gb max). Separate volume control for MIC1/LINE1, MIC2/LINE2, MIC3/Line3,MIC4/LINE4/MP3 inputs.
- BASS and Tremble controls. Built in limiter and clipping indicator. MIC 1 priority button will lower the music when talking into the mic when priority is activated. 6 segments signal level indication (-10dB, -6dB, -3dB, 0dB, limit, clip). Built in fan cooling system keeps component cool at all times. Built in fire input will override the system when activated in case of emergencies. Siren output allows you to connect a siren that would get activated in case of an emergency.
Bestseller No. 8
BOSS Audio OX4.400 4 Channel Car Amplifier – 1600 Watts, Full Range, Class A/B, 2-8 Ohm Stable, MOSFET Power Supply, Bridgeable
- POWER: 400 Watts Max x 4 @2-Ohms, 800 Watts Max x 2 @4-Ohms, 1600 Watts Max x 1 Bridged @4 Ohms. DIMENSIONS: Dimensions - Depth 12.3” x Width 7” x Height 2.3”, Weight – 6.4 lbs.
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal. Efficiency is the name of the game
- FULL RANGE: With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers. BRIDGEABLE: Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality
Bestseller No. 9
OSD Audio 8 Zone 16-Channel Digital Amplifier, 80W/Channel, Distributed Audio & Home Theater - MX1680
- HIGH-PERFORMANCE AMPLIFIER: A slim yet robust multi-channel amplifier that supplies reliable power to up to eight zones
- RESIDENTIAL/COMMERCIAL: Can be configured as the main amplifier for an audio distribution system or as an amplifier for 5.1 or 7.2 home theater systems
- AUDIOPHILE-LEVEL AMPLIFICATION: Delivers high-resolution music playback with 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms)
- CLASS D EFFICIENCY: Uses Class D amplifier technology for low distortion and higher efficiency and special protection circuitry safeguards from thermal overload and short circuits
- SLIM DESIGN: Includes front-panel status indicators and slim form factor that is 2U rack-mountable (hardware included)
SaleBestseller No. 10
AIYIMA A07 TPA3255 Power Amplifier 300Wx2 HiFi Class D Stereo Digital Audio Amp 2.0 Channel Amplifier for Passive Speaker Home Audio (A07+DC 32V Power Adapter)
- ❶ This AIYIMA A07 power amplifier adopt the TPA3255D2 amp chip and NE5532 op-amp chip.Very Quiet, Runs Extremely Cool,Easy to set up.It's a nice mini audio component amplifiers for Home Audio stereo system
- ❷ 300W+300W HiFi integrated class D amplifier, Exclusively designed for the customers who pursue HiFi sound,High efficient max power output up to 300 Watt
- ❸ Two input ways:3.5mm AUX Audio input/ RCA Audio input（3.5mm interface is also Aux Audio output interface.More detail connection and use ways,pls see the main picture shown)
- ❹ Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre system and so on;A computer, an tube preamp(TUBE A3 PRO / T7 / T8), matched with our A07 home speaker amplifier, connected to your home audio passive speakers to form a perfect HIFI system, allowing you to liberate your ears in this noisy city
- ❺ Package with a DC 32V 5A Power Adapter for free,But if you want to get the maximum power of 300W, you need to buy a power adapter that uses DC 48V and current is above 7A(Cannot use industrial power supply,and please choose the correct passive speaker power to use ).Any doublt and help, please contact the seller for support: www.amazon.com/hz/help/contact/A3BG62S1F23IH5#
Are you Googling for top 10 best 8 ohm amplifier for your budget in 2021? Our team had scanned more than 74,993 customer satisfaction about top 10 best 8 ohm amplifier in 2021, we have come up with the top 10 rated products you may be interested in. We have ranked the best brands from Artificial Intelligent and Big Data, as you see below:
Our Best Choice: Sound Storm Labs EV4.1600 Evolution 1600 Watt 4 Channel 2 to 8 Ohm Stable Class A B Full Range Bridgeable Mosfet Car Amplifier with Remote Subwoofer Control
Our rating: (4.6 / 5)
Get your cell audio procedure pumping with the Seem Storm Evolution EV4.1600 4-Channel Course A/B Comprehensive Vary Amplifier. This 2-Ohm steady Amplifier characteristics 1600 Watts Max Ability with a MOSFET electricity provide to rock your automobile. Personalize the seem with Variable Lower and Higher Move Crossover and Bass Enhance. Shift your new music into large gear with the Remote Subwoofer Command. Bridge Channels for even extra electric power and adaptability. With clean strains and straightforward, refined styling, Evolution Amplifiers supply big overall performance and cellular audio excellence. Enjoy electricity and stability with the Audio Storm EV4.1600. For additional item facts, please scroll down.
200 W MAX Power @ 4 Ohm x 4 Channels
800 W MAX Bridged Ability @ 4 Ohm x 2 Channels
Complete-Variety, Course A / B Topology, MOSFET Electrical power Supply
Very low and Large Stage Inputs, Variable Small Pass Crossover, Variable Significant Go Crossover
Variable Bass Raise, Variable Input Acquire Control, Enter Sensitivity Selector, Distant Subwoofer Manage
Dimensions: Depth 13.5” x Width 10” x Height 2.3”
6 Calendar year Platinum On the internet Seller Guarantee